P O R TA B L E C O M PAC T E L L I P T I C A L Owner’s Manual
TABLE OF CONTENTS Before You Begin........................................................................... 2 Safety Instructions Consult Your Physician Getting Started............................................................................... 4 Product Size and Weight What’s in the Box Warning Labels Serial Number Location Assembling Your Unit.................................................................. 6 Using Your Cubii Go+...............................................................
Welcome to the Cubii Communitii ! ™ Whether you are taking the first step on your fitness journey or looking to get more exercise from the comfort of home, bringing the Cubii Go+ into your routine is a big stride toward a healthier, more active life! Before you begin, we want you to be familiar with important information on how to use Cubii Go+ safely so that you and your loved ones get the most out of your experience. Let’s review the safety notes and warnings now.
BEFORE YOU BEGIN Safety Instructions WARNING Consult your physician before starting this or any exercise program. This is especially important if you have never exercised before, are pregnant, or suffer from any health problem. If at any time during exercise, you feel faint, dizzy, or experience pain, stop and consult your physician. WARNING Do not use when standing. Only use when sitting. Failure to follow all warnings and instructions could result in serious injury or death.
I. Before You Begin 9. Always choose a workout plan which best fits your fitness and ability level. Know your limits and train within them. Always use common sense when exercising. 10. Do not wear loose or dangling clothing while using Cubii Go+. 11. Be careful to maintain your balance on your chair while using, mounting, dismounting, or assembling Cubii Go+; loss of balance may result in a fall and serious bodily injury. 12. Keep both feet firmly and securely on the pedals while exercising. 13.
GETTING STARTED Product Size and Weight The assembled Cubii Go+ measures: 24.7”L x 16.7”W x 8.9”H (62.7cm x 42.4cm x 22.7cm) The weight of the unit is approximately 20.1 lb (9.1 kg).
II. Getting Started Warning Labels The warning label is located on your Cubii Go+ product here: WARNING Failure to follow all warnings and instructions could result in serious injury or death. Before assembling or using this product, read and follow the Owner’s Manual and all other instructions that accompany this product. Replace this warning label if damaged, illegible, or removed. Keep others including children and pets away from equipment.
Assembling Your Unit Follow the steps below to assemble your Cubii Go+ compact seated elliptical. Step 1 — Crossbar Before installing the crossbar, orient the roller wheels to point away from the body of the unit, and with the screw holes facing up. Lower the unit onto the crossbar so that the holes line up with the screws. Tighten screws with the included wrench, taking care not to scratch your Cubii Go+.
III. Assembling Your Unit Step 2 — Align Pedal Align the right pedal tube with the tube shaft on the ring of the elliptical. Insert the pedal tube into the tube shaft and push in until the unit stops.
III. Assembling Your Unit Step 3 — Press and Insert Pedals Align the pedal wheel with the wheel track on the bottom side of the elliptical. Once aligned, push the button on the pedal tube and continue pushing in the pedal into the tube shaft.
III. Assembling Your Unit Step 4 — Click and Lock Continue pushing in the pedal into the tube shaft and wheel track until you hear a click or the pedal is pushed in all the way. To ensure your pedal is locked into place, release the button once the pedal is pushed in all the way and try to pull the pedal outwards. Your pedal should be locked into place.
USING YOUR CUBII GO+ Make sure to have followed all of the assembly steps in the Quick Start guide before you begin using Cubii Go+. Transporting The Cubii Go+ features an extendable handle and roller wheels which allow the unit to be rolled across the floor, much like a rolling suitcase. To do this, follow these steps: 1. Extend the handle by holding down the handle release button, then pull the handle out fully, about 8” (20cm). 2. Lift the handle to angle the unit and roll it to the desired position.
IV. Using Your Cubii Go+ Positioning The Cubii Go+ can be used either in an upright position, such as with an office chair, or in a more reclined position, such as when placed in front of a sofa. • Cubii Go+ occupies a floor area of 24.7” x 16.7” (0.63m x 0.42m). Please leave a clear zone behind the training area that is at least 24” (0.6m). This zone must be clear of any obstruction and provide the user a clear exit path. • Find the seat configuration that suits you most.
IV. Using Your Cubii Go+ Adjusting the Resistance Cubii Go+ has 10 resistance levels. Adjust your workout intensity by turning the resistance control knob. Level 1 is the lowest intensity and level 8 is the highest. We recommend you begin at Level 1 and increase the intensity gradually over time. Using the Chair Wheel Cup If you’re using Cubii Go+ while sitting in a chair with wheels or castors, follow the steps below: Extend the handle by at least 1 position to expose the wheel cup.
IV. Using Your Cubii Go+ CHARGING YOUR CUBII ELLIPTICAL Step 1 — Connect Wall Adapter Connect charging cable to wall adapter and ensure wall adapter is plugged into power source. Step 2 – Locate Charging Socket Locate the charging port on your Cubii elliptical and plug in the cable. Step 3 – Check Display for Charging Symbol Ensure charging cable is plugged in to your Cubii elliptical and cable is secure. Screen should be powered and lightning bolt symbol flashing to designate charge in progress.
IV. Using Your Cubii Go+ Battery Life and Power The screen on your Go+ comes equipped with a rechargeable lithium-ion battery. With normal use, your Cubii elliptical should last about 30 days before you need to charge again. Charging your Go+ completely can take up to 6 hours. You can check the battery level in the Cubii app or on the built-in screen. READING THE DISPLAY CONSOLE User Options Your Cubii Go+ elliptical can store data separately for User 1, User 2, and Guest.
IV. Using Your Cubii Go+ Bottom Row The bottom row displays the following metrics: • • • • Time (00:00:00-99:59:59 hour:min:sec) elapsed during active workout Distance (000.00-999.99 mi or km) pedaled during a workout Calories (000.00-999.99 kcal) during a workout RPM - (0-999 strides/min) rotations per minute during a workout Press the MODE button to switch which metric is displayed. You can use the SCAN mode to automatically toggle between the above metrics every 7 seconds.
IV. Using Your Cubii Go+ below 100%. It will remain solid when charging is complete, but still plugged in. The symbol will disappear when your elliptical is not charging. “Smart Reset” All metrics are additive and counted throughout the day. Once you have paired the mobile app with your Cubii, then the metrics displayed on the console will automatically reset each evening at midnight (as long as your Cubii battery does not deplete).
IV. Using Your Cubii Go+ Manually Set a “Smart Reset” If you do not pair your elliptical to the Cubii app, but still want your console to reset each evening at midnight, follow the instructions below to set the clock to the current time: 1. Simultaneously press the USER and MODE buttons 3 times in a row to reset the clock. It should flash “00:00”. 2. Press the USER button to cycle through hours until you get to the right hour. Note that the clock uses military time. 3.
IV. Using Your Cubii Go+ automatically track your workouts. The app also supports many other features such as viewing your workout history, setting goals and tracking against them, creating or participating in group leaderboards, chatting with friends and much more. Supported Devices Your Go+ can sync with select mobile devices that support Bluetooth® 4.0 technology. Currently, we support iPhone mobile devices running iOS® 12.0 or higher. (Note that supported versions are subject to change over time.
IV. Using Your Cubii Go+ 6. Once successfully paired, the Bluetooth® symbol on your builtin screen will stop blinking. 7. The app will ask if you would like to become User 1, User 2, or proceed as Guest. Make a selection. 8. Start your workout and enjoy your Cubii experience! 9. From here on, every time you launch the app, it will search for all Cubii devices in your vicinity and automatically connect with an elliptical that it has already paired with.
IV. Using Your Cubii Go+ Distance Metric Toggle Switch from miles to kilometers, or kilometers to miles, by switching the setting in the mobile app. When this action is taken, the app communicates the change to the elliptical console so it displays the appropriate distance metric. Resistance Level The Cubii app will automatically retrieve the resistance level from the elliptical. However, please note that the app CANNOT update the resistance on the elliptical itself.
V. General Information is toggled onto the correct user profile. Without an active connection with the app, the data will be attributed to whichever User profile is selected on the console. Profile Reset You can always reset a user profile from the app. This will give another user the opportunity to take that profile spot. “Smart” Reset After you connect your elliptical to the app, your Cubii console will reset itself each night at midnight (your local time based on your phone’s settings).
V. General Information Care and Maintenance The safety and integrity designed into Cubii Go+ can only be maintained when Cubii Go+ is regularly examined for damage and wear. It is the sole responsibility of the user/owner to ensure that regular maintenance is performed. Special attention should be given to the following: • • • Periodically wipe the unit down with a damp cloth, paying special attention to the metal surface of the wheel tracks.
V. General Information Important Health & Safety Instructions Read and follow these instructions: • Cubii Go+ has been designed to be used only while sitting. Do not stand on the pedals as it was not designed to be used while standing. • Do not subject Cubii Go+ to heavy shock or treat it excessively. Do not attempt to disassemble or modify it. • Use Cubii Go+ indoors on a level surface. Keep it away from moisture and dust. • Do not expose Cubii Go+ to extremely high or low temperatures.
V. General Information Regulatory Notices 1. This device complies with Part 15 of FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. 2. Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
CAN ICES-003 (B) / NMB-003 (B) This device contains license-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s license-exempt RSS(s). Operation is subject to the following two conditions: (1) This device may not cause interference. (2) This device must accept any interference, including interference that may cause undesired operation of the device.
Customer Support support@mycubii.com cubii.