Owner's Manual
16
IV. Using Your Cubii Go+
below 100%. It will remain solid when charging is complete, but
still plugged in. The symbol will disappear when your elliptical is
not charging.
“Smart Reset”
All metrics are additive and counted throughout the day. Once
you have paired the mobile app with your Cubii, then the metrics
displayed on the console will automatically reset each evening at
midnight (as long as your Cubii battery does not deplete). If you
have not paired the mobile app with your Cubii, then the data
will continue to aggregate unless you manually reset the data
or manually setup the “smart reset” feature (see section below
entitled Manually Set a “Smart Reset”).
Console Prole Reset
User1andUser2prolescanberesetfromtheconsole.Simply
selecttherelevantuserprolethenholdtheUserbuttonfor3
secondsthenreleasethebuttontocompletetheprolereset.
Resettingtheuserprolefromthebuilt-inconsoleerasesanydata
storedforthatproleandalsodelinkstheprolefromtheapp.
Theprolecanbeeasilyre-establishedintheappifneeded.
Manual Data Reset
Manuallyresetdataforanyproleontheconsole(User1,User
2orGuest)byselectingtherelevantprole(seeUserButton
section above) and then holding the Mode button for 3 seconds
thenreleasethebuttontocompletetheprolereset.Thisaction
resetsanydatadisplayedonthescreenfortheselectedprole.
Distance Metric Toggle
To switch from miles to kilometers (or kilometers to miles), use
the MODE button to select the Distance metric. Then, hold the
MODE button for 6 seconds. If you are using the Cubii app, this
updatewillalsobereectedthere.