Owner's Manual
17
IV. Using Your Cubii Go+
Manually Set a “Smart Reset”
If you do not pair your elliptical to the Cubii app, but still want
your console to reset each evening at midnight, follow the
instructions below to set the clock to the current time:
1. Simultaneously press the USER and MODE buttons 3 times in a
rowtoresettheclock.Itshouldash“00:00”.
2. Press the USER button to cycle through hours until you get to
the right hour. Note that the clock uses military time.
3. Press the MODE button to cycle through minutes until you get
to the right minute.
4. Once you have entered the current time, simultaneously press
the USER and MODE buttons 3 times in a row to save the time.
If there is no activity for more than 5 seconds during this process,
the reset will be cancelled.
The “smart reset” feature is ONLY activated if the user performs
the manual actions above to set the RTC on the console (or it will
automatically be applied if the user connects their app). If you do
not choose to manually set the clock following the instructions
above, and do not connect to the Cubii app, your console will
continue to add and display all data until you manually reset the
screen.
Please note the “smart reset” function and clock setting will only
remain while the battery retains enough capacity to power the
device. If the battery is depleted, the “smart reset” feature must
again be manually established using the above instructions.
Connecting with Devices
Your Cubii Go+ is a connected Bluetooth® Low Energy device,
meaning it can pair directly with the Cubii mobile app to