Instructions / Assembly

14
ASSEMBLY
MUST TIGHTEN IN SEQUENCE: A,B,C,D,E,F,G.
Step 4
4a. Removing the Hardware: Remove seven Hex Bolts (89), seven Spring Washers (14), four
Flat Washers (15) and three Curve Washers (22) from the Main Frame (1) using the 6mm Allen
Wrench provided.
4b. Connecting the Wires: Connect the Console Extension Wire (11) from the Front Post (2) to
the Main Frame Wire (21) from the Main Frame (1).
4c. Installing the Front Post: Slide the Front Post (2) onto the Main Frame (1). Align the holes of
the Front Post (2) and Main Frame (1). Secure the Front Post (2) to the Main Frame (1) with the
previously removed seven Hex Bolts (89), seven Spring Washers (14), four Flat Washers (15)
and three Curve Washers (22). Tighten the Hex Bolts (89) with the 6mm Allen Wrench provided.
4d. Installing the Front Post Cover: Secure the Left and Right Front Post Cover (19) & (20)
onto the Front Post (2) with three Self-Tapping Phillips Screw (18) and two Self-Tapping
Phillips Screws (58) using the Multi Hex Tool with Phillips Screwdriver provided.
Multi Hex Tool with Phillips
Screwdriver
1PC
6mm Allen Wrench 1PC
Tools:
Hardware Pack:
(18) Self-Tapping Phillips
Screw 3PCS
(58) Self-Tapping Phillips
Screw 2PCS