Manualshelf

Instructions / Assembly

ManualsBrandsFitness Reality ManualsCardio EquipmentX-Class 310 Bluetooth Smart Technology Upright Exercise Bike with 20-Computer Workout Programs
11121314151617181920
15
ASSEMBLY
Step 5
5a. Removing the Hardware: Remove four Hex Bolts (13), four Spring Washers (14) and four
Flat Washers (15) from the Handlebar (3) using the 6mm Allen Wrench provided.
5b. Connecting the Hand Pulse Wires: Connect the Hand Pulse Wire (12) from the Handlebar
(3) with the Hand Pulse Extension Wires (10) from the Front Post (2).
5c. Installing the Handlebar: Attach the Handlebar (3) onto the Front Post (2) with four Hex
Bolts (13), four Spring Washers (14) and four Flat Washers (15) using the 6mm Allen Wrench
provided. Thoroughly tighten the hardware once complete.
5d. Installing the Cover: Align the Handlebar Lower and Upper Cover (17) & (16) and secure
with four Self-Tapping Phillips Screws (18) using the Multi Hex Tool with Phillips Screwdriver
provided.
Multi Hex Tool with Phillips
Screwdriver
1PC
6mm Allen Wrench
1PC
Tools:
Hardware Pack:
(18) Self-Tapping Phillips
Screw 4PCS
Pre-Installed Hardware:
(13) Hex Bolts
4PCS
(14) Spring Washer
4PCS
(15) Flat Washers
4PCS