Instructions / Assembly

24
TROUBLESHOOTING
Problem
Potential Cause
Correction
E1
1. The motor is not activate
Motor Problems
Symptoms include an unusually loud
noise coming from the Motor, which
means the Gears are NOT meshing
correctly. Try reversing the resistance
and try again. If this fails then contact
customer service.
Problem
Potential Cause
Correction
E2
1. There is something
wrong with the cables.
Ensure that the cables are connected
properly and not damaged. If problem
still exists, contact Customer Service.
2. There is something
wrong with the computer.
Remove the Console (8) and ensure
that all wires are connected properly and
not damaged. If problem still exists,
contact Customer Service.
3. There is something
wrong with the motor.
Ensure that Motor Wire (39) is properly
connected to the Motor (46) If problem
still exists, contact Customer Service.