Use and Care Manual

ASSEMBLY

Step 6

6a. Removal of Hardware for Installation: Remove four Hex Bolts (38), four Spring Washers

(15) and four Flat Washers (16) from the Main Frame (1).

6b. Installing the Seat Slide Tube: Attach the Seat Slide Tube (3) onto the Main Frame (1) by

aligning the four holes on the Seat Slide Tube (3) and the Main Frame (1) using the previously

removed four Hex Bolts (38), four Flat Washers (16), and four Spring Washers (15). Tighten the

Hex Bolts (38) with the 6mm Allen Wrench provided.

6c. Adjustable Pole Installation: Remove two Hex Cap Bolts (91) from the Brake Adjustment

(90). Insert the Brake Adjustment (90) into the Adjustable Rod (89) and secure using the

previously removed two Hex Cap Bolts (91). Tighten the Hex Cap Bolts (91) with the 5mm Allen

Wrench provided.

6mm Allen Wrench

1PC

Tools:

5mm Allen Wrench

1PC

(16) Flat Washer

4PCS

(15) Spring

Washer 4PCS

(38) Hex Socket

Bolt 4PCS

(91) Hex Cap Bolt

2PCS

Pre-Installed Hardware: