Use and Care Manual

ASSEMBLY

Step 8

8a. Removing Hardware for Installation: Remove four

Socket Phillips Screws (36) from the Seat Post (8).

8b. Handrail Support Tube Installation: Attach the both

Right and Left Handrail Support Tubes (4) & (5) onto

the Seat Post (8) with the four Socket Phillips Screws

(36). Tighten all the Screws (36) with the Multi Hex Tool

with Phillips Screwdriver provided.

Step 9

9a. Removal of Hardware for Installation: Remove four

Hex Bolt (39), four Spring Washers (54), and four Flat

Washers (43) from the underside of the Seat (45).

9b. Installing the Seat to the Seat Post: Align the holes of

the Seat (45) to the holes on the Seat Post (8). Secure the

Seat (8) with the previously removed four Hex Bolt (39), four

Spring Washers (54), and four Flat Washers (43). Tighten

the Hex Bolts (39) using the 6mm Allen Wrench provided.

Multi Hex Tool with Phillips

Screwdriver

1PC

Tools:

6mm Allen Wrench

1PC

(36) Socket Phillip Screw

4PCS

Pre-Installed Hardware:

(43) Flat Washer

4PCS

(54) Spring

Washer 4PCS

(39) Hex Socket

Bolt 4PCS

Pre-Installed Hardware: