Use and Care Manual

25
CONSOLE
Users:
User Selection
1. At the main screen use the UP or DOWN buttons to navigate to the “USERS” selection, then
press OK.
2. Use the UP or DOWN buttons to navigate to between User1 through User4 and press OK.
3. Use the UP or DOWN buttons to navigate to between the PROGRAM or EDIT USER
functions and press OK.
a. PROGRAMS: Will take you to the menu choices to set up a workout using the
selected user data.
b. EDIT USER: Here you will be able to set user settings such as Gender, Height,
Weight, and Age. Once you have input your information, Press OK to confirm. You will
be returned to the START screen as if the console just turned on.
Language and Measurement Selection:
1. At the main screen press and hold the STOP and OK buttons for 3 seconds
2. A screen will appear and allow you to choose between, English Units (Miles) or Metric Units
(Kilometers). Press OK to confirm the selection.
3. Then a language option will appear. Users can select between English, French or Spanish.
4. Press OK to confirm the selection and to return to the main menu.
Error Codes:
1. When the console show “ERROR 2”
a) The Tension motor may be damaged.
b) There is a bad connection between the tension motor wire and the
console.
2. When doing an HRC program, the console will show “HOLD HAND PULSE
SENSORS” if no heart rate signal is detected for 10 seconds.
Problem
Reason
Solution
Console
Displays
“E2”
Tension Adjustment motor is
not adjusting the tension.
Contact Customer
Service, AD value
issue.