Users Manual

Symptom Cause Solution
Wiring is connected
incorrectly.
Make correct wiring
connection.
The car ignition is not on. If the power supply is
properly connected to the
car accessory, switch the
ignition on.
The fuse is blown Replace the fuse.
Failure in the software. Initialize the system by
pressing the RESET button
with a thin pointed object.
Volume is in minimum. Adjust volume to the desired
level.
Wiring is not properly
connected.
Check wiring connection.
Unbalanced audio output. Adjust the balance in the
sound settings menu.
The radio does not work The antenna cable is not
connected
Insert the antenna cable
properly.
The radio station
automatic tuning does
not work
The signals are too weak. Try to select stations
manually.
No power
No sound or the sound is very
quiet.