Product Manual

To Unlock the Door After Self-Clean

 Keep the oven dial in CLEAN position.

 Push and hold the momentary door lock switch on the

control panel while moving the door lock handle to the

right until it stops.

 Turn the oven control knob to OFF position.

NOTE: The oven door cannot be locked or unlocked unless

the knob is in the CLEAN position.

When the oven is COMPLETELY cool, wipe up the fine

powdered ash with a clean damp cloth.

STOPPING OR INTERRUPTING THE SELF-CLEANING CYCLE

If it becomes necessary to stop or interrupt a self-cleaning

cycle due to excessive smoke or fire, follow these steps:

If the DOOR LOCKED indicator light is OFF:

The oven temperature is below 400°F. Keep the oven control

knob in CLEAN position. Push and hold the momentary

door lock switch while moving the door lock handle to the

right until it stops. Turn oven dial clockwise to OFF. The

oven door may be opened and used normally.

If the DOOR LOCKED indicator light is ON:

The oven temperature is above 400°F. Turn the oven control

clockwise to OFF position and wait for the oven to cool.

When the DOOR LOCKED indicator light does not come

back on when the oven knob is turned counter-clockwise to

CLEAN, the door may be unlocked and opened. With the

oven control in the CLEAN position, push and hold the

momentary door lock switch while moving the door lock

handle to the right until it stops. Turn the oven control

clockwise to OFF. The oven door may be opened for normal

operation or maintenance.

CAUTION: DO NOT FORCE THE DOOR OPEN.

THIS CAN DAMAGE THE DOOR LOCK

MECHANISM. USE CAUTION WHEN OPENING

THE DOOR AFTER STOPPING THE SELF-

CLEAN CYCLE. THE OVEN WILL STILL BE

VERY HOT. CORRECT THE CONDITION

WHICH CAUSED THE SMOKING, WAIT

THREE HOURS, AND RESTART SELF-CLEAN.

CONTROL PANEL DIAGRAMS