MSDS

Page 5 of 11
Safety Data Sheet
acc. to OSHA HCS (29 CFR 1910.1200)
Printing date 09/09/2015 Reviewed on 09/09/2015
Trade name: Roadside® Fix-a-Flat®
(Cont'd. of page 4)
41.2.4
·
Additional information:
The lists that were valid during the creation were used as basis.
·
Exposure controls
·
Personal protective eq uipment:
·
General pro tective and hygienic measures:
The usual precautionary measures for handling chemicals should be followed.
Avoid close or long term contact with the skin.
Keep away from foodstuffs, beverages and feed.
Wash hands before breaks and at the end of work.
Do not inhale gases / fumes / aerosols.
·
Engineering controls:
·
Breathing equipment:
Not required under normal conditions of use.
·
Protection of hands:
Not required under normal conditions of use.
The glove material has to be impermeable and resistant to the product/ the substance/ the preparation.
Selection of the glove material on consideration of the penetration times, rates of diffusion and the
degradation
·
M aterial of gloves
Not required.
The selection of the suitable gloves does not only depend on the material, but also on further marks of
quality and varies from manufacturer to manufacturer. As the product is a preparation of several
substances, the resistance of the glove material can not be calculated in advance and has therefore to be
checked prior to the application.
·
Penetration time of glove material
The exact break through time has to be found out by the manufacturer of the protective gloves and has to
be observed.
·
Eye protection:
Safety glasses
·
Body protection:
Not required under normal conditions of use.
·
Limitation and supervision of exposure into the environment
No relevant information available.
·
Risk management measures
See Section 7 for additional information.
No relevant information available.
9 Physical and chemical properties
·
Information on basic physical and chemical properties
·
General information
·
Appearance:
Form:
Aerosol
Color:
Different according to coloring
·
Odor:
Ammonia-like
·
Odor threshold:
Not determined.
·
pH-value at 20 °C (68 °F):
< 9.5
(Cont'd. on page 6)