MSDS

Page 5/11
Safety Data Sheet
according to 1907/20 06 /EC (REACH), 1272/2008/EC (CLP), and
GHS
Printing date 25.09.2014 Revision: 25.09.2014
Trade name: Roadside® Fix-a-Flat®
(Contd. of page 4)
39.4.1
·
8.1 Control parameters
·
Ingredients with l i mit values th a t require monitoring at the workplace:
811-97-2 Norf l urane
WEEL (USA) 1000 ppm
·
DNELs
No further relevant information available.
·
PNECs
No further relevant information available.
·
Additional information:
The lists valid during the making were used as basis.
·
8.2 Exposure controls
·
Personal protective equipment:
·
General pro tective and hygienic measures:
Avoid close or long term contact with the skin.
The usual precautionary measures are to be adhered to when handling chemicals.
Keep away from foodstuffs, beverages and feed.
Wash hands before breaks and at the end of work.
Do not inhale gases / fumes / aerosols.
·
Respiratory protec tion:
Not required under normal conditions of use.
·
Protection of hands:
Not required under normal conditions of use.
The glove material has to be impermeable and resistant to the product/ the substance/ the preparation.
Selection of the glove material on consideration of the penetration times, rates of diffusion and the
degradation.
·
M aterial of gloves
Not required.
The selection of the suitable gloves does not only depend on the material, but also on further marks of
quality and varies from manufacturer to manufacturer. As the product is a preparation of several
substances, the resistance of the glove material can not be calculated in advance and has therefore to be
checked prior to the application.
·
Penetration time of glove material
The exact break through time has to be found out by the manufacturer of the protective gloves and has to
be observed.
·
Eye protection:
Safety glasses
·
Limitation and supervision of exposure into the environment
No further relevant information available.
·
Risk management measures
See Section 7 for additional information.
No further relevant information available.
(Contd. on page 6)