SDS

ManualsBrandsFix-A-Floor ManualsAdhesives20 oz. Polyurethane Wood Floor Repair Adhesive (2-Pack)

Page 1 of 7

SAFETY DATA SHEET

PMS 1542P Prepolymer

GHS product identifier :

Other means of identification :

Product type :

Material Uses :

Supplier’s details :

Email address of person :

Responsible for this SDS

Emergency telephone :

PMS 1542P Prepolymer

Not available

Viscous liquid / waxy solid at room temperature

Polyurethane coatings and adhesives

Fix-A-Floor Worldwide, Inc.

1225 NE Savannah RD #101 Jensen

Beach,FL34957

Chemtrec: 1-800-424-9300

number (24h/7day)

OSHA/HCS status This material is considered hazardous by the OSHA

Hazard Communication Standard (29 CFR

1910.1200).

Classification of the ACUTE TOXICITY: INHALATION Category 4

Substance or mixture SKIN IRRITATION – Category 2

EYE IRRITATION – Category 2B

RESPIRATORY SENSITAZION

RESPIRATORY IRRITATION single exposure –

Category 3

GHS label elements

Hazard pictograms:

Signal word: Danger

Section 1.

Identification

Section

Hazards i

dentification

Summary of content (7 pages)

PAGE 1
SAFETY DATA SHEET PMS 1542P Prepolymer Section 1. Identification GHS product identifier : PMS 1542P Prepolymer Other means of identification : Not available Product type : Viscous liquid / waxy solid at room temperature Material Uses : Polyurethane coatings and adhesives Supplier’s details : Fix-A-Floor Worldwide, Inc.
PAGE 2
Hazard statements: Harmful if inhaled. May causes skin and eye irritation. May cause respiratory sensitazion. May cause respiratory irritation. Precautionary statement: Wear eye or face protection as well as protective gloves. Always wear chemical respiratory protection masks to prevent exposure to vapors. Wash hands thoroughly after handling. Avoid ingestion, inhalation, skin and eye contact. IF INHALED: Remove victim to fresh air and keep at rest in a comfortable position.
PAGE 3
Section 5. Fire-fighting measures EXTINGUISHING MEDIA FLASH POINT Approximately 420°F for MDI (Pensky-Martens CC) Not known for finished product EXTINGUISHING MEDIA Water spray, carbon dioxide, dry chemical or appropriate foam SPECIAL FIREFIGHTING PROCEDURES Firefighters should wear self-contained breathing apparatus and protective protect against potentially toxic and irritating fumes.
PAGE 4
Section 8. Exposure controls/personal protection EXPOSURE LIMITS 4,4’-Diphenylmethane Diisocyanate(MDI) CAS 101-68-8 OSHA (PEL) .02 ppm ACGIH (TLV) 0.005 ppm TWA PERSONAL PROTECTION Use appropriate chemical vapor mask to prevent exposure to vapors. Use appropriate full face shield and/or safety goggles. Use permeation resistant gloves. ie butyl, neoprene or nitrile Use protective clothing to prevent skin contact. ADDITIONAL PROTECTIVE MEASURES Avoid contact with skin and eyes.
PAGE 5
Section 11. Toxicological information TOXICITY DATA FOR POLYMERIC DIPHENYLMETHANE DIISOCYANATE Acute Oral Toxicity LD50: > 2,000 mg/kg (rat) Acute Inhalation Toxicity LC50: 490 mg/m , 4 hr (rat) Acute Dermal Toxicity Slightly irritating (rabbit) 3 Section 12. Ecological information ECOLOGICAL – BASED ON DATA FOR POLYMERIC DIPHENYLMETHANE DIISOCYANATE Degradation: In moist conditions, material reacts with water forming mostly insoluble polyureas.
PAGE 6
Sea Transport (IMDG) Proper Shipping Name: Hazard Class: UN/NA Number: Packaging Group: Hazard Label: POLYMERIC RESIN COMPOUND, Not regulated None None None None Air Transport (ICAO/IATA) Proper Shipping Name: Hazard Class: UN/NA Number: Packaging Group: Hazard Label: POLYMERIC RESIN COMPOUND, Not regulated None None None None Section 15.
PAGE 7
New Jersey Environmental Hazardous Substances List and/or New Jersey RTK Special Hazardous Substances Lists: Weight % CAS No. Components Diphenylmethane Diisocyanate (MDI) 101-68-8 10 – 20% California Proposition 65: To the best of our knowledge, this product does not contain any of the listed chemicals that the state of California has found to cause cancer, birth defects or other reproductive harm. Section 16.