User's Manual

11
UVC Disinfection Robot
1. To prevent damage to the device, only trained professionals are
allowed to disassemble the disinfection device.
2. Do not touch the UV lamps with hands to avoid damaging the lamps.
3. Do not wrap the lamps with paper or cloth to avoid fire.
4. While operating, the robot must be kept at least 10 m away from
people and animals for protection against ultraviolet rays.
5. Stay away from the disinfection robot to prevent personal harm due to
exposure to ultraviolet rays.
6. Do not look directly at the UV lamps, to avoid burning eyes.
7. If the robot cannot be powered off remotely, wear protective clothing
and goggles to avoid direct exposure to ultraviolet rays before going to
the operating site to manually power off the robot.
8. The proper temperature range for robot operation is 0–50°C.
Temperatures out of the range will directly affect robot operation.
9. Before UVC disinfection, remove the UVC protective cover (warning
sign for UVC disinfection) from the FJDT02UV robot and place it at the
entrance of the room.
Warning: Please read the safety instructions and user manual carefully before using the robot. Only persons trained
by the manufacturer or designated agencies can operate the robot. The manufacturer shall not bear any legal
responsibility for personal injuries and property damages caused by failure to comply with the safety instructions
and operation guide.