User's Manual

9. Charging

1. Automatic Return to the Charging Pile

The FJD UVC Disinfection Robot automatically returns to the charging

pile for charging (ensure that the charging pile is in a fixed position and

is powered on) when either of the following two conditions is met:

⚫ The battery level of the robot is below 20%.

⚫ The robot has completed its task.

2. Manual Charging

1. Pair the robot with the tablet remote controller.

2. Push the robot to the position of the charging pile.

3. Align the back of the robot with the charging pile, and push the robot

to the charging pile, so that the charging contacts on the back of the

robot are in contact with those of the charging pile. Then, tap Return

for Charging on the app. The indicator blinks red and green after the

charging starts.

3. Charging with the Adapter

When the robot cannot be powered on due to a dead battery, you can

charge the robot with the adapter of the charging pile as follows:

1. Turn off the power switch of the robot.