User's Manual

49
2. Connect the charging plug of the adapter to the manual charging
port of the robot.
3. After the charging plug of the adapter is successfully connected to
the manual charging port, the status indicator of the charger blinks red
and green, indicating that charging is in progress.
4. When the charging status indicator turns green, the charging is
completed. Pull the adapter plug of the charging pile out of the manual
charging port and put on the cover on the manual charging port.
4. Battery Charging
1. Remove the battery compartment cover of the robot, turn the latch to
unlock the battery, and pull out the battery, as shown in the figure below.