Users Manual

security
64/128-bitWEP,WPA/WPA2
Frequency range
2.4GHz~2.4835GHz
General
specification
power input
DC 12V，1A
Working temperature
-20℃ ~ 60℃
Storage temperature
-30℃ ~ 60℃
Maximum infrared
irradiation distance
10m
Working humidity
10～95%
四、Instructions for
1. WIFI camera is composed of camera body, camera bottom plate and power cable.
2.Glue the camera baseboard to the body with 3M glue, and fix the camera with screws on the
base.
3.
One end of the power cable is directly connected to the 12V power supply of the vehicle,
4.Power on after the preparation, and hold down the Reset button to check whether the
camera can work normally. After the camera makes three consecutive clicks, the connection
preparation is complete.
五、WARNING
WARNING: This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference, and (2) This
device must accept any interference received, including interference that may cause
undesired operation.
CAUTION: Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
RF Exposure Warning Statements:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled
environment. This equipment shall be installed and operated with minimum distance 20cm
between the radiator & body.
and the other end is directly connected to the camera.