With colo or-changing LED lights BW WD19AAS12 Ver.01 Rev.
Power LED Program selector Volume Down/ Previous i Trackk POWER: Press and hold the. Play/P Pause Volume Up/ Next Trackk Power button for 2 seconds s to turn device on or off. VOLUME +: Short press (< 0.5s) the Volume Up + button to turn up volume. Press and hold the + button ((2s)) to go g to the next track. VOLUME - : Short press (< 0.5s) the Volume Down – bu uttons to turn down volume. Press and hold (2s) the – button to go to previous tra ack.
SPEAKER PAIRING: To pair the speaker: 1. Make sure the smartphone, tablet, or computer you’re y using with the speaker has Bluetooth. 2. Turn on the speaker (press and hold the power bu utton for 2 seconds) and look for the small blinking light. 3. Find the BW COLOR SPK S speaker in your device’s Bluetooth list, and select. The device and Bluetooth will find each other every y time, so long as the speaker is set to Bluetooth and your device’s Bluetooth is on.
USB Charging port AUX-IN AUX-IN AUX IN MODE: 1. Plug one end of the cord intto the speaker and the other into the headphone jack on your device. Press play. (NOTE: The speaker must be on n in order to play.) USB CABLE: 25 cm micro-USB cable. CALL HANDLING: INCOMING CALL: Answering and ending a call – When speaker is paired to o your phone, press the play/ pause press the play/pause button to answer the call. call To o end a call, call button.
FCC WARNING: e This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FC CC Rules. These limits are designed to provide reasonable protecttion against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency en nergy and, if not installed and used in accordance with the instructio ons, may cause harmful interference to radio communications.
