Product Manual

ManualsBrandsFlagro Inc ManualsHeaters, Stoves + FireplacesFlagro USA Propane Construction Heater — 150,000 BTU

OPERATING INSTRUCTIONS MANUAL

(Please retain for future reference)

For

F-150 CONSTRUCTION HEATER

SPECIFICATIONS:

Model ……………………… F-150

Fuel .…………………….. Vapor propane

Input (maximum) .…………………….. 150,000 btuh

(minimum) .…………………….. 50,000 btuh

Manifold Pressure .…………………….. 2¼ to 20 psig

Hose Length .…………………….. 20 ft. standard

Regulator with POL .…………………….. Preset at 20 psig max

Approved .…………………….. ULC Listed

Weight .…………………….. 27 lbs

Dimensions .…………………….. 30″ Long, 11¼″ Wide, 14″ Tall

Air Outlet .…………………….. 8″ diameter

Fuel Consumption .…………………….. 2.3 to 6.9 lbs per hour

Ignition .…………………….. Manual

14501 Judicial Road, Suite 40

Burnsville, MN 55306

1-866-266-2484

www.flagrousa.com

Summary of content (3 pages)

PAGE 1
OPERATING INSTRUCTIONS MANUAL (Please retain for future reference) For F-150 CONSTRUCTION HEATER SPECIFICATIONS: Model Fuel Input (maximum) (minimum) Manifold Pressure Hose Length Regulator with POL Approved Weight Dimensions Air Outlet Fuel Consumption Ignition ……………………… .…………………….. .…………………….. .…………………….. .…………………….. .…………………….. .…………………….. .…………………….. .…………………….. .…………………….. .…………………….. .…………………….. .…………………….. F-150 Vapor propane 150,000 btuh 50,000 btuh 2¼ to 20 psig 20 ft.
PAGE 2
CAUTION: Pipe Fittings: When loosened, tightened or replaced, the complete fittings should be removed and approved pipe dope applied to the male threads. Flare Fittings: No pipe dope is required on the SAE flare fittings. When a heater is serviced, the valve train should be checked for leaks with a soap and Leaks: water solution or approved leak detector solution. Installation & Maintenance: Heaters are to be installed and operated in accordance with CGA Standard B149.
PAGE 3
ATTENTION: Raccords de tuyau: S’il doit etre desserre, resserre our emplace, le raccord doit etre retire afin d’appliquer un enduit pour tuyaux sure les filets males. Raccords evases: Aucun enduit n’est requis sure les raccords evases SAE. Lors de l’entretien, il faut verifier la commande de soupape a l’aide d’une eau Fuites: savonneuse pour constater les fuites possibles. Installation et entretien: Les chaffrettes doivent etre instalees et utilisees conformement a la norme B149.