Flair Puck IN-HOME INSTALL GUIDE DUCTLESS MINI SPLITS questions? flair.
★ Read First ● During Setup, you’ll need the Puck in line of site of the mini split to validate the IR code set (recommend about five feet). Flair Pucks can be installed in their final location after Setup. ● Flair uses your mini split brand and remote control model number to determine compatibility. Have these ready prior to Setup. ● You’ll need the the login credentials for your 2.4 GHz WiFi network. Flair will not see 5.0 GHz networks.
① Install Flair App & Create Account First, download the Flair app to your mobile device. iOS app from the Apple App Store: https://flair.co/ios Android app from the Play Store: https://flair.co/android Next, open the Flair App and use your email address to create your Flair account. support@flair.co flair.
② Complete In-App Setup During Setup, you’ll need the Puck in line of site of the mini split. To begin Setup, in the Flair App, click the plus Home.
Appendix A: Puck Power Options Each Puck includes a USB AC adapter, 5 ft. USB cable, two Lithium Metal AAA batteries, a Puck door, and an adhesive strip. Gateway vs Sensor Flair Gateway Pucks need to be powered using the supplied cable and adapter (see options below for hiding cables). The Flair USB cable is a specialized cable. Contact Flair for using alternate or longer USB cables. Flair Sensor Pucks can use batteries for a streamlined install.
Appendix B: Troubleshooting Connectivity During Setup, Pucks may take up to five minutes* to join a Flair network. If after five minutes you don’t see the units online, try the following troubleshooting steps: ● Make sure that the batteries are properly installed and have enough voltage. ● Move the Sensor Puck closer to the Gateway Puck temporarily to eliminate range issues.
Appendix B: Hybrid Systems Flair controlled mini splits can be used in conjunction with central heating and cooling systems in a few different ways. If you are using an integrated thermostat with your mini splits, setup your mini splits first, then click the plus sign and select “Add a new Thermostat”. Flair Setpoint Mode When you prefer using Flair to control the set point, scheduling and home/away states for your HVAC system(s) and mini split(s). Best when wanting to use Flair as a single point of control.
© Standard Euler, Inc. Flair Homeowner Mini Split Install Guide v1.
