Installation Guide

Add a Gateway Puck
If Sensor Pucks are going offline, they may be too far from a Gateway Puck. To boost
signal strength in the Flair network, you can add another Gateway Puck, or convert an
existing Sensor Puck to a Gateway. To convert a Sensor Puck to a Gateway Puck:
1. Plug in the Puck to be used as the additional Gateway to power using the
supplied Flair cable and adapter
2. In the Puck’s gear menu, select “Forget WiFi”. Let the Puck restart
3. In the Puck’s gear menu, select Make Gateway. The Puck will then restart
4. In the Flair App click the plus and select Add a New Gateway Puck
5. Follow the Gateway Setup wizard
support@flair.co flair.co/contact