BTHF361 Declaration: Without written permission from original manufacturer, reproduction, transfer, distribution or storage of part or all of the contents in this document in any form is prohibited. The company reserves rights to make any changes and improvements to the product described in this document without prior notice.
BTHF361 Certification and Safety Approvals This product has been tested and found to comply with Bluetooth BQB requirements, part 15 of FCC rules, R&TTE Directive（99/5/EC） or CE marked requirements. Users should not make changes or modify the device in any way. Changes or modifications without expressly approved by the party responsible for compliance could void the user’s authority to operate the device. This device complies with part 15 of the FCC Rules.
BTHF361 Contents： 1. INTRODUCTION .................................................................................................5 1.1 1.2 1.3 1.4 1.5 2. BLUETOOTH TECHNOLOGY ..............................................................................5 BLUETOOTH HANDSFREE SPEAKER .................................................................5 PRODUCT FEATURES.......................................................................................5 PACKAGE CONTENTS ..................................
BTHF361 1. 1.1 Introduction Bluetooth Technology Bluetooth is an internationally standardized technology supporting short distance wireless communications. Any two Bluetooth-compatible equipments can wirelessly communicate with each other via Bluetooth connection. Though line-of-sight is not required, Bluetooth connections could be subject to interferences from obstructions such as walls, human bodies, and other electronic devices.
BTHF361 z Voice security ensured by using 128-bit encryption z Better portability with internal rechargeable battery z Low power consumption; the headset supports up to 3.5 hours talk time and 150 hours standby time, while the handsfree with up to 5 hours active time and more than 300 hours standby time.
BTHF361 A-6. Sun-visor Clip: Fix the device onto sun-visor A-7. Charging Port : Connect to the travel (or car) charger to charge the battery of device. B：Headset B-1. Earphone: Voice delivery. B-2. Magnet: Adsorb headset onto handsfree B-3. Microphone: Voice pick-up. B-4. Red/Blue LED: Indicate device status. B-5. Main Button: Turn on/off headset, pair, receive, reject and end call, etc.
BTHF361 2. Using Your Handsfree 2.1 2.1.1 Battery Charging and Usage Battery Charging This device contains a rechargeable Li-Polymer battery. First-time charging time is about 4 hours. Later-on recharging time is around 2-3 hours. Detailed charging procedures are as follows: Master Handsfree Car Kit : 1. Connect the car charger to the cigarette lighter, or plug the USB cable into PC. 2. Referring to Figure 2, plug the connector of the charger to handsfree’s charging port to start charging.
BTHF361 You can also use the USB charging cable to charge the device on your PC, which will take longer to charge as the power output of the USB port is lower than it is with the car charger. Note: 1. It is recommended to charge your device when it is not in use. 2. Please note that “inserting” charger will cause a device reset and power off. The existing connection between the device and the mobile phone will be disconnected. 2.1.2 Battery Information 1.
BTHF361 With great portability and flexibility, this device can also be used outside of such car environment such as in office and/or at home. 2.3 Turning On/Off Handsfree Turning on the Handsfree: Press and hold main button for 1 second, you will hear 3 power-up tones. The Blue LED gives 2 blinks per 2 seconds; the Red LED is off. This indicates the handsfree is power on. Turning off the Handsfree: Press and hold main button for at least 2 seconds, you will hear 1 key tone and 4 power-down tones.
BTHF361 Note： 1. If pairing is successful, handsfree’s Red LED is off. The Blue LED gives 3 quick blinks per 2 seconds. If your handset shows that pairing is failed and the handsfree is still in the paring mode, you need to go back to above steps 3-4 to repeat the pairing process. 2. Your handsfree will remain in the pairing mode for about 2 minutes. If pairing cannot be finished within 2 minutes, the handsfree will enter into the standby mode (without Bluetooth connection in this case).
BTHF361 Reject Call: Press and hold main button for 1 second. End Call: Press main button. Redial: Press and hold main button for 1 second. 2.5.2 Voice Dialing If the connected handset supports voice dialing, you can press main button to activate voice dialing. Before using voice dialing, you must record voice tags in your handset. Please refer to your handset manual for detailed descriptions on how to set up voice dialing and recording voice tags. 2.5.
BTHF361 2. Switch on the handsfree. The handsfree automatically starts to connect the last two connected handsets. When two handsets are connected with the handsfree, the first connected one works as the primary device and the other the secondary. Any operation initiated from the handsfree side, such as redialing and voice dialing, will only be applied to the primary device.
BTHF361 3. Quick User Guide You can follow the instructions listed in Table below to operate your handsfree devices. (Please refer to section 1.5 for details of key and key press duration definitions.
BTHF361 Reject Call Incomin g call Incomin g call Press and hold main button for 1 second 2 high tones End Call Talk Talk Press button 1 short tone Last number Redial Standb y Standby Press and hold main button for 1 second 1 short tone Voice Dialing Standb y Standby Press button 1 short tone Volume up Talk Talk Volume down Talk Talk main Press and hold button 1 second for Press and hold Low Power Warning Call Transfer (handsfr ee to handset) Call Transfer (handset to handsfre
BTHF361 4. Maintenance BTHF361 is a well-designed communications device; careful maintenance and proper use will extend the product life and keep its elite performance in delivering voice and music. Following maintenance procedures may be helpful to you： z Always turn off power and keep your device in a safe place when it is not in use z Keep the device dry, away from water, precipitation, humidity, moisture, and various liquids that may corrode electronic circuits.
BTHF361 5. Important Messages and Frequently Asked Questions Q1. Power off ： Low battery indicator; please recharge your battery as soon as possible. Q2. Can't power up the device after charging more than 20 minutes： For first time use, the device should be charged at least 40 minute in advancve. It is recommended that the battery should be fully charged before using the device. Q3.
