BlueTone™ BTHF106 User Manual Bluetooth Headset User Manual Model：BlueTone™ BTHS106 .
BlueTone™ BTHF106 User Manual Declaration: Without written permission from original manufacturer, reproduction, transfer, distribution or storage of part or all of the contents in this document in any form is prohibited。 The company reserves rights to make any changes and improvements to the product described in this document without prior notice.
BlueTone™ BTHF106 User Manual Certification and Safety Approvals This product has been tested and found to comply with part 15 of FCC rules, R&TTE Directive（99/5/EC） or CE marked requirements. Warning：Users should not make changes or modify the device in any way. Changes or modifications without expressly approved by the party responsible for compliance could void the user’s authority to operate the device. This device complies with part 15 of the FCC Rules.
BlueTone™ BTHF106 User Manual 1. 1.1 1.2 1.3 1.4 1.5 2. INTRODUCTION .................................................................................................................................5 BLUETOOTH TECHNOLOGY ..................................................................................................................5 PRODUCT FEATURES ............................................................................................................................5 PACKAGE CONTENT ..............
BlueTone™ BTHF106 User Manual 1. Introduction 1.1 Bluetooth Technology Bluetooth is an internationally standardized technology supporting short distance wireless communications. Any two Bluetooth-compatible equipments, such as mobile phone, PDA, PC, headset, mouse, keyboard, printer, etc. can wirelessly communicate with each other via Bluetooth connection. To ensure worldwide compatibility, Bluetooth operates on the globally available ISM (Industrial Scientific and Medical) frequency band. Within 2.
BlueTone™ BTHF106 User Manual 1.4 Overview 1. Charging Port 5. Ear-hook 6. Red/Blue LED 3. Button K2 2. Button K1 7. Earphone 4. Button K3 Figure 1 Headset Overview 1. Charging Port: for connecting to the travel (or car) charger to charge headset battery 2. Button K1: for turning on/off headset, pairing headset and receive/reject call 3. Button K2: for adjusting earphone volume up 4. Button K3: for adjusting earphone volume down 5.
BlueTone™ BTHF106 User Manual 2. Using Your Headset 2.1 Battery Charging and Usage 2.1.1 Battery Charging This device contains a rechargeable Li-Polymer battery. First-time charging time is about 4 hours. Later-on recharging time is around 2-3 hours. Detailed charging procedures as follows: 1. Connect the travel charger to the power outlet. 2. Referring to Figure 2, plug the mini USB connector of the charger to headset’s charging port to start charging.
BlueTone™ BTHF106 User Manual b）back Figure 3：How to Use Ear Hook Note: To get the best performance, you need to wear your headset and Bluetooth phone on the same side of your body and ensure there are no obstructions (including parts of your body) between them. 2.3 Turn On/Off Headset Turn on the Headset: Long press K1, you will hear 2 high tones, and Blue LED gives 5 quick blinks following by 1 blink per 3 seconds. Red LED is off. This indicates the headset is power on.
BlueTone™ BTHF106 User Manual 2. Your headset will remain in the pairing mode for about 2 minutes. If paring cannot be finished within 2 minutes, the headset will enter into the standby mode (without Bluetooth connection in this case). You need to repeat the above steps 2-5 to restart the pairing process. 2.4.2 Pairing your Headset with Other Bluetooth Equipment In addition to Bluetooth phone, your headset can also pair with other Bluetooth equipment for realizing short distance wireless communications.
BlueTone™ BTHF106 User Manual End Call: Short press K1. Redial: Long press K3. 2.5.2 Adjusting Headset Volume In the talking mode，you can short press K2/K3 to increase/decrease your headset volume. You can repeat the above operation to headset volume to a desirable level. 2.5.3 Mute You can mute or un-mute an ongoing call by long pressing K1 and K3 together.When you mute an ongoing call, you can hear 1 low tone every 20 seconds, and Blue LED gives 4 quick blinks per 3 seconds. 2.5.
BlueTone™ BTHF106 User Manual 3. Quick User Guide You can follow the instructions listed in Table 1-6 below to operate your headset. (Please refer section 1.4 and 1.5 for details of key and key press duration definitions.) Note: your handset can only talk to paired Bluetooth handsets. For handsets supporting HFP only, you also need to establish Bluetooth connection between your headset and your phone before making and answering calls.
BlueTone™ BTHF106 User Manual Table 3: Call Functions CURRENT STATUS FUNCTION HEADSET INDICATOR OPERATION HANDSET HEADSET AUDIO TONE Answer Call Standby Standby Short press K1 Key Tone Reject Call Standby Standby Key Tone End Call Talk Talk Long press K1 Long or Short press K3 Long or Short press K2 Short press K1 Redial Standby Standby Long press K3 Key Tone Voice Dialing Standby Standby Short press K1 Key Tone Cancel Voice Dialing Voice Dialing Voice Dialing Short press K1
BlueTone™ BTHF106 User Manual Table 4: Transfer Functions CURRENT STATUS FUNCTION HEADSET INDICATOR OPERATION HANDSET Call Transfer (headset to handset) Call Transfer (handset to headset) HEADSET AUDIO TONE LED INDICATOR Talk Talk Long press K1 and K2 together Key Tone Blue LED blinks once per 3 seconds. Red LED is off. Talk Talk Long press K1 and K2 together Key Tone Blue LED gives 4 quick blinks per 3 seconds. Red LED is off.
BlueTone™ BTHF106 User Manual 4. Important Messages and Frequently Asked Questions 1. Except handsets, what kind of devices can the headset communicate with： Besides pairing with a handset for receiving and making phone calls, the headset can also communicate with PDA and computer that equipped with Bluetooth。 For examples, when communicating with a computer (through a USB Dongle) users can chat and/or listen music over the internet。 2.
BlueTone™ BTHF106 User Manual 5. Maintenance BlueTone™ BTHS106 is a well-designed communications device, careful maintenance and proper use will extend the product life and keep its elite performance in delivering voice. Following maintenance procedures may be helpful to you： Always turn off power and keep your headset in a safe place when it is not in use Keep the device dry, away from water, precipitation, humidity, moisture, and various liquids which may corrode electronic circuits.
