BlueTone™ BTHF080 User Manual Bluetooth Headset User Manual Model：BlueTone™ BTHS080 .
BlueTone™ BTHF080 User Manual Declaration: Without written permission from original manufacturer, reproduction, transfer, distribution or storage of part or all of the contents in this document in any form is prohibited。 The company reserves rights to make any changes and improvements to the product described in this document without prior notice.
BlueTone™ BTHF080 User Manual Certification and Safety Approvals This product has been tested and found to comply with part 15 of FCC rules, R&TTE Directive（99/5/EC） or CE marked requirements. Warning：Users should not make changes or modify the device in any way. Changes or modifications without expressly approved by the party responsible for compliance could void the user’s authority to operate the device. This device complies with part 15 of the FCC Rules.
BlueTone™ BTHF080 User Manual 1. 1.1 1.2 1.3 1.4 1.5 2. INTRODUCTION .................................................................................................................................5 BLUETOOTH TECHNOLOGY ..................................................................................................................5 PRODUCT FEATURES ............................................................................................................................5 PACKAGE CONTENT ..............
BlueTone™ BTHF080 User Manual 1. Introduction 1.1 Bluetooth Technology Bluetooth is an internationally standardized technology supporting short distance wireless communications. Any two Bluetooth-compatible equipments, such as mobile phone, PDA, PC, headset, mouse, keyboard, printer, etc. can wirelessly communicate with each other via Bluetooth connection. To ensure worldwide compatibility, Bluetooth operates on the globally available ISM (Industrial Scientific and Medical) frequency band. Within 2.
BlueTone™ BTHF080 User Manual 1.4 Overview 1. Charging port 7. Earphone 6. Blue LED 2. Button K1 8. Removable Ear hook 3. Button K2 4. Microphone 5. Red LED Figure 1 Headset Overview 1. 4-PIN mini USB charging port, for connecting to the travel charger to charge headset battery 2. Button K1, for turning on/off headset, paring, receive call, volume up, etc. control functions 3. Button K2, for reject call, call termination, redial, volume down, etc. control functions 4.
BlueTone™ BTHF080 User Manual 2. Using Your Headset 2.1 Battery Charging and Usage 2.1.1 Battery Charging This device contains a rechargeable Li-Polymer battery. First-time charging time is about 4 hours. Later-on recharging time is around 2-3 hours. Detailed charging procedures as follows: 1. Connect the travel charger to the power outlet. 2. Referring to Figure 2, plug the mini USB connector of the charger to headset’s charging port to start charging.
BlueTone™ BTHF080 User Manual Note: To get the best performance, you need to wear your headset and Bluetooth phone on the same side of your body and ensure there are no obstructions (including parts of your body) between them. 2.3 Turn On/Off Headset Turn on the Headset: Long press K1, you will hear 2 sharp tones, and Blue LED gives 5 quick blinks following by 1 blink per 3 seconds. Red LED is off. This indicates the headset is power on.
BlueTone™ BTHF080 User Manual This headset can paired with up to 8 Bluetooth equipments (including mobile handsets). The corresponding 8 sets of pairing information are recorded in a table maintained by the headset. Each paired equipment can wireless communicated with the headset after setting up a Bluetooth connection. Please check section 2.4.4 on procedures to set up a Bluetooth connection. 2.4.
BlueTone™ BTHF080 User Manual 2.5.2 Adjusting Headset Volume In the talking mode，you can short press K1/K2 to increase/decrease your headset volume. You can repeat the above operation to headset volume to a desirable level. 2.5.3 Mute You can mute or un-mute an ongoing call by press K1 and K2 simultaneously.When you mute an ongoing call, you can hear key tone, and Blue LED gives 4 quick blinks per 3 seconds. 2.5.
BlueTone™ BTHF080 User Manual 3. Quick User Guide You can follow the instructions listed in Table 1-5 below to operate your headset. (Please refer section 1.4 and 1.5 for details of key and key press duration definitions.) Note: your handset can only talk to paired Bluetooth handsets. For handsets supporting HFP only, you also need to establish Bluetooth connection between your headset and your phone before making and answering calls.
BlueTone™ BTHF080 User Manual Table 3: Call Functions For the mobile handset using Handsfree Profile: CURRENT STATUS FUNCTION HEADSET INDICATOR OPERATION HANDSET Answer call HEADSET AUDIO TONE Standby (connect) Standby (connect) Talk Standby (connect) Standby (connect) Talk Short press K1 Key Tone Long press K2 or K1 Key Tone Long press K2 Key Tone Standby (connect) Talk Standby (connect) Talk Long press K2 Volume down Talk Talk Short press K2 Mute Talk Talk Un-mute Talk Mute Pre
BlueTone™ BTHF080 User Manual Table 4: Transfer Functions For the mobile handset using Handsfree Profile: CURRENT STATUS FUNCTION HEADSET INDICATOR OPERATION HANDSET Call transfer (headset to handset) Call transfer (handset to headset) HEADSET AUDIO TONE LED INDICATOR Talk Talk Long press K1 Key Tone Blue LED blinks 3 every 3 seconds. Red LED is off. Talk Talk Long press K1 Key Tone Blue LED blinks 4 times every 3 seconds. Red LED is off.
BlueTone™ BTHF080 User Manual 4. Important Messages and Frequently Asked Questions 1. Except handsets, what kind of devices can the headset communicate with： Besides pairing with a handset for receiving and making phone calls, the headset can also communicate with PDA and computer that equipped with Bluetooth。 For examples, when communicating with a computer (through a USB Dongle) users can chat and/or listen music over the Internet. 2.
BlueTone™ BTHF080 User Manual 5. Maintenance BlueTone™ BTHS080 is a well-designed communications device, careful maintenance and proper use will extend the product life and keep its elite performance in delivering voice. Following maintenance procedures may be helpful to you： Always turn off power and keep your headset in a safe place when it is not in use Keep the device dry, away from water, precipitation, humidity, moisture, and various liquids that may corrode electronic circuits.
