User's Manual
Table Of Contents
- 1. Introduction
- 2. General Specification
- 3. Pin Definition
- 4. Physical Interfaces
- 5. Electrical Characteristic
- 6. Reference Design
- 7. Mechanical Characteristic
- 8. Recommended PCB Layout and Mounting Pattern
- 9. Recommended Reflow Profile
- 10. Ordering Information
FLC-BTM403 Series User Manual
Flaircomm Technologies Confidential
-7-
2. General Specification
Bluetooth Specification
Standard Bluetooth2.1+EDR
Profiles
SPP, DUN, HDP,
detailed profiles depends on the firmware
Frequency Band 2.402G ~ 2.480G
Maximum Data Rate 3Mbps
Antenna Multilayer Ceramic Antenna or UFL port
RF Input Impedance 50 ohms
Baseband Crystal OSC 16MHz
Interface UART, PIO, AIO, USB, SPI, PCM
Sensitivity -84dBm@0.1%BER
RF TX Power +13dBm(class1) +4dbm(class2)
Power
Supply Voltage 3 ~ 3.6V DC
Working Current Depends on profiles, 22mA typical
Standby Current(Connected) <2mA
Operating Environment
Temperature -20ºC to +55ºC
Humidity 10%~90% Non-Condensing
Certifications
BQB/FCC/CE
Environmental
RoHS Compliant
Dimension and Weight
Dimension 35.30mm×14.00mm×2.50mm
Weight 2.00g
Table 2: General Specification