TM Electro Wizard Battery Disconnect Switch
FR1051 Mounting Diagram Positive disconnection, 12V GROUNDED SOLENOID (power supply coil negative)
FR1051 Technical Specifications Positive disconnection, 12V GROUNDED SOLENOID (power supply coil negative) CHARACTERISTICS Nominal tension Max. continuous current on main contacts Max. short time current on main contacts Recommended wire section Protection degree Tightening torque M10 nuts Tightening torque M5 nuts Operating temperature range Contacts Contact terminals Nuts for contacts Peak current coil rated input Max.
FR1051 Positive disconnection, 12V GROUNDED SOLENOID (power supply coil negative) The Flaming River FR1051 Disconnect Switch is designed to disconnect a vehicle electrical system using a toggle switch(Not Included). The disconnect switch should be located as close as possible to the battery. The toggle switch can be located in any convenient location for ease of operator use. 1. Positive battery cable is connected to terminal 30 (POS.BATT.) 2. Vehicle load is connected to terminal 30A (POS.TEL.) 3.
FR1051 Wiring Diagram Positive disconnection, 12V GROUNDED SOLENOID (power supply coil negative)
FR1052 Mounting Diagram Positive disconnection 12V INSULATED SOLENOID (power supply coil from battery)
FR1052 Technical Specifications Positive disconnection 12V INSULATED SOLENOID (power supply coil from battery) CHARACTERISTICS Nominal tension Max. continuous current on main contacts Max. short time current on main contacts Recommended wire section Protection degree Tightening torque M10 nuts Tightening torque M5 nuts Operating temperature range Contacts Contact terminals Nuts for contacts Peak current coil rated input Max.
FR1052 Positive disconnection 12V INSULATED SOLENOID (power supply coil from battery) The versatility of Flaming River’s FR1052 Disconnect Switch allows for multiple installation options based upon user need and vehicle application. Options: A Include positive or negative electrical disconnection B Positive or negative switching. C Continuous operator controlled remote “on”, and Passive disconnect via vehicle ignition off.
FR1052 Positive disconnection 12V INSULATED SOLENOID (power supply coil from battery) Passive Disconnect (Ignition OFF Battery Disconnection) This installation uses a momentary switch (Not Included) to energize the vehicles electrical system, then uses the ignition system to maintain the disconnect switch in the closed (on) position. When the ignition is turned off, the disconnect switch automatically opens (off) and the electrical system is disconnected. 1. 2. 3. 4.
FR1052 Wiring Diagram Positive disconnection 12V INSULATED SOLENOID (power supply coil from battery)
FR1052 Wiring Diagram Positive disconnection 12V INSULATED SOLENOID (power supply coil from battery)
FR1052 Wiring Diagram Positive disconnection 12V INSULATED SOLENOID (power supply coil from battery)
FR1052 Wiring Diagram Positive disconnection 12V INSULATED SOLENOID (power supply coil from battery)
WARRANTY DISCLAIMER: Flaming River’s Limited Warranty Flaming River warrants its products to be free from defects in material and workmanship for a period of one (1) year after the date of purchase, except that: All steering columns are warranted for a period of three (3) years from the date of purchase.
Flaming River Industries,Inc. 800 Poertner Dr. Berea, Ohio 44017 1-800-648-8022 • www.flamingriver.