Owner's Manual

Instructions
LOOPERmode
InLOOPERmode,FC01willletyouusethepedalasastandalonelooper.SelectLOOPERusingthe
MODESWITCHtoenterLOOPERmode.
TheLOOPERhas4basicstateswhencreatingloops,RECORD,PLAY,DUBandSTOP.
RECORD
Thisisthefirststepincreatingaloop.
1.PresstheFOOTSWITCHonceandbeginplayingyourinstrument.TheLOOPERwillrecord
what

youplay.

2.PresstheFOOTSWITCHagaintostoprecordingandbeginPLAYBACKoftheloop.
PLAY
InthisstatetheLOOPERwillcontinuouslyplaybacktheloopyoujustrecorded.Youcanjamaway
overthetopofthisloopwithoutaddingtoit.
DUB
InthisstatetheLOOPERwillrecordandaddanextralayertoyourloop.
1.WhilsttheLOOPisinplaybackstatepresstheFOOTSWITCHoncetobegincreatingyourDUB.
TheLOOPERwillrecordwhatyouplayandaddittoyourloopasanadditionallayer.
2.PresstheFOOTSWITCHagaintoexitDUBstateandrevertbacktoPLAYBACKstate.Yournewly
createdDUBlayerwillcontinuetoplayback.
3.UNDO/REDOPressandholdtheFOOTSWITCHtoundothelastrecordedDUBlayer.Pressand
holdtheFOOTSWITCHagaintoredothelastrecordedDUBlayer.

05
www.flammainnovation.comShenzhenFlammaInnovationCo.,Ltd