Air Filter Selection Guide It’s Not Just Air, It’s the Source of Life.
Disposable Filters Heavy Duty Box Frame Filter - MERV 4 Synthetic Spun Glass (Model # 10255) or Synthetic (11255) Media Flanders HD Industrial Grade filters are designed for heavy workloads and in any application where disposable panel filters are recommended. A wide range of 1/2”, 1” and 2” standard depths and standard face sizes are available, plus nearly any “special” size. UL 900 Class 2.
Cut-to-Fit Kwik Kuts (Model # KK-xxxx) These are 15” x 24” pads of filter media that can be easily cut to fit any window or wall mounted room air conditioner. They are offered in the same spun glass, foam and aluminum media described above. Also offered are 1/2” Permaire and plastic-backed foam. Hammock Rolls and Pads Hammock rolls are available in nominal 1” spun glass, 2” spun glass, and 1” polyester synthetic fiber media. Performance data on all Flanders hammock media is available upon request.
Bulk Media & Pads Permaire Rolls and Pads Permaire is a unique completely synthetic, self-supporting and washable media. Permaire pads cut to the proper dimensions is actually a complete filter ready to install. With nothing more than Permaire and a hefty pair of scissors or a razor knife, replace almost any size 1/2”, 1” or 2” framed panel filter. Permaire filters are passive electrostatic type products.
Bulk Media & Pads ST55 (Models PRELK55Gxx) Nominal 1/2“ tackified PSF. Light green and white with green on the air exit side. Pre-T (Models PTxx) Pre-T is an extremely rugged psf designed for repeated cleaning by washing or vacuuming. Dry, untreated. Nominal 1/2“ thickness only. Red and purple with purple on the air exit side. PS125 (Models PS125-xx) Nominal 1 “ untreated PSF which is reinforced with a scrim backing on the downstream side.
Ring Panels, Links, Sleeves & Cubes Polyester Panels Links & Cubes Ring Panel and Cube filters are made by heat sealing layers of synthetic filtering media together over an interior, corrosion-resistant steel support frame. An overcut of media outside the seal forms a built-in gasket (selvage) between the wire support frame and holding frame, which secures the filter and prevents air bypass. This special feature allows these filters to be installed without the use of retainer fasteners.
Pleated Filters Economy Pleat MERV 7 Pleated Filter - (Model # 84355) The MERV 7 Economy Pleated filter features a filtering medium that is more efficient and ecologically friendly. Made entirely from recyclable materials, this medium achieves MERV 7 efficiency with low resistance to airflow. It is also unaffected by high humidity and is hydrophobic (non-moisture absorbing).
Pleated Filters Pre Pleat™ M13 MERV 11 Pleated Filter - (Model # 90013) Ideal choice to achieve the minimum efficiency requirements of LEED® Green Building design. The low initial resistance of the M13 can also contribute an overall strategy of reducing energy consumption. Upgrades are trouble-free as a direct replacement for most commercial and industrial applications.
Air Cleaner Series & Bag Filters High Efficiency Air Cleaner - MERV 11 (Model # 82755) The High Efficiency Air Cleaner MERV 11 consists of efficient, high quality synthetic media and self-sealing gaskets that eliminates air-bypass of dust and contaminants. The Deep V-Pleats allow 5x more media than standard filters, providing greater surface area. This reduces airflow restriction for less energy consumption, increasing the effective life of the filter.
Extended Surface Bag Filters Precision Pak Spun Glass or Synthetic Media Bag Filters - (Model # PAP) Designed for use in most commercial or industrial HVAC systems where medium to high efficiency filtration is required. Available in two media types: lofted fiberglass and micro-fine synthetic media with average efficiency ranges of 55%, 65%, 85%, and 95% per ASHRAE Standard 52.1 test methods. Offered MERV 10-15 according to ASHRAE Std. 52.2.
Rigid Filters Rigid Air Extended Surface Lofted Media Box Type Filter Model #’s: Synthetic - PRP**S4412 or Glass - PRP**4412. Example size 24x24x12 used in example. Insert 55, 65, 85, or 95 for efficiency Rigid-Air extended media surface rigid filters are designed for use in most commercial or industrial HVAC systems where medium to high efficiency filtration is required. They feature your selection of media backed with expanded metal and pleated.
Metal Washable Filters & Converstion Chart KKM Washable Permanent Filters Galvanized Model # 50055 and Aluminum Model # 51255 Flanders Model KKM is a heavy duty, washable, aluminum media, all metal filter. KKM is suitable for all residential and commercial applications. The KKM offers large filtering area, high dust holding capacity, uniform loading and low resistance to air flow. It is recommended that the filter media be coated with dust adhesive for optimum performance.
Calculating Custom Filter Sizes “C” Depths Available: 1”, 2” and 4” Follow these Instructions to determine Custom Filter Size 1. Measure “A” (Width of Filter) in inches and enter this measurement in space “A” below 2. Measure “B” (Height of Filter) in inches and enter this measurement in space “B” below 3. Measure “C” (Depth of Filter) in inches and enter this measurement in space “C” below Enter the custom filter size in inches: Note: Must include measurements on lines A, B and C to complete order.
PrecisionAire Item # and Description "ITEM# PREFIX" 10055 ITEM # & SIZING INFORMATION PRECISIONAIRE DESCRIPTION EZ FLOW II MIN. SIZE 5"X5" / MAX. SIZE 27"X36" DOUBLE SIZES OF EZ FLOW II N/A USE 10255 SERIES FOR FILTERS OVER 36" 10155 EZ FLOW MIN. SIZE 5"X5" / MAX. SIZE 27"X36" DOUBLES SIZE ARE N/A USE 10255 SERIES FOR FILTERS OVER 36" 10255 FLAT PANEL HD MIN. SIZE 5”X5” / MAX. SIZE 27”X36” 10255D FLAT PANEL HD MIN.
PrecisionAire Item # and Description "ITEM# PREFIX" PRECISIONAIRE DESCRIPTION ITEM # & SIZING INFORMATION FCP** FCP CARBON PLEAT (200 = STANDARD CAP / 300 = HIGH CAP) ACTIVATED CARBON FILLED NONWOVEN MEDIA ADSORBERS 81255 PLEAT CHARCOAL - NO DOUBLES AVAILABLE MIN. SIZE 6”x6” / MAX SIZE 25”X30” 80055D PRE PLEAT 40 LPD - STANDARD CAPACITY MIN. SIZE 25”X30” / MAX.
Flanders Corporation 531 Flanders Filters Road Washington, NC 27889 Phone: 252.946.8081 Fax: 252.946.3425 Email: customerservice@flanderscorp.com Website: www.Flanderscorp.