Filter Selection Guide
8
Air Filter Selection Guide
Pleated Filters
Pre Pleat™ M13
MERV 11 Pleated Filter - (Model # 90013)
Ideal choice to achieve the minimum efciency requirements of LEED® Green
Building design. The low initial resistance of the M13 can also contribute an
overall strategy of reducing energy consumption. Upgrades are trouble-free as
a direct replacement for most commercial and industrial applications.
Pre Pleat™ Class 1
(Model # 85855)
Designed for applications where a UL Class 1 re rated lter is required and
metal frame lters are unsuitable because of disposal problems. The Pre
Pleat Class 1 pleated air lter has been tested by Underwriters Laboratories,
Incorporated and found to meet the stringent performance characteristics of a
Class 1 air lter for ammability, as outlined in Standard 900. Class 1 air lter
units are described as “Those that, when clean, do not contribute fuel when
attacked by ame and emit only negligible amounts of smoke.”
Pre Pleat™ High Temperature
(Model # 84555)
Designed for increased air ltration efciencies in an operating environment
where temperatures reach 400 degrees Fahrenheit. Typical examples include
air intakes for drying ovens or high temperature baking applications.
FCP Carbon Pleat
(Model # FCP***)
Activated Carbon Filled Nonwoven Media Adsorbers
Designed for removal of malodorous compounds at low concentration levels.
Utilizing the latest technology in ne mesh activated carbon, the product
provides high removal efciency of nuisance odors. The uniqueness of the
product is the lter media. The polyester media is lled with ne mesh
activated carbon. The FCP Series is available in standard capacity and high
capacity models in 2” and 4” depths.
Physical Data
Media: 100% Non-woven polyester media
Media Support: Diamond-shaped expanded metal
Pleat Design: V-Pleat
Frame: Moisture-resistant clay coated frame
Options
200 Series - Standard Capacity / 300 Series - High Capacity
The filter media has a carbon mass loading of 14 oz. per sq. yd. of material.
The FCP Series is available with three contaminant specific activated carbon
products. Insert carbon type below into model number.
201 or 301 - Removal of VOC’s
202 or 302 - Removal of Acid Gases
204 or 304 - Removal of Alkaline Gases