Pre Pleat 40 Data Sheet

CFM PD CFM PD CFM PD CFM PD
10x10x1 208 0.17 347 - 1.1 0.2 208 0.15 347 - 1.3 0.2
10x20x1 417 0.17 694 - 2.3 0.3 417 0.15 694 - 2.7 0.3
12x20x1 500 0.17 833 - 2.7 0.3 500 0.15 833 - 3.1 0.3
12x24x1 600 0.17 1000 - 3.2 0.3 600 0.15 1000 - 3.7 0.4
14x20x1 583 0.17 972 - 3.3 0.3 583 0.15 972 - 3.7 0.4
14x25x1 729 0.17 1215 - 4.1 0.4 729 0.15 1215 - 4.6 0.5
15x20x1 625 0.17 1042 - 3.5 0.4 625 0.15 1042 - 3.9 0.4
16x20x1 667 0.17 1111 - 3.7 0.4 667 0.15 1111 - 4.1 0.4
16x25x1 833 0.17 1389 - 4.6 0.5 833 0.15 1389 - 5.2 0.5
18x24x1 900 0.17 1500 - 4.9 0.5 900 0.15 1500 - 5.7 0.6
18x25x1 938 0.17 1563 - 5.2 0.5 938 0.15 1563 - 5.9 0.6
20x20x1 833 0.17 1389 - 4.5 0.5 833 0.15 1389 - 5.1 0.5
20x24x1 1000 0.17 1667 - 5.4 0.5 1000 0.15 1667 - 6.2 0.6
20x25x1 1042 0.17 1736 - 5.7 0.6 1042 0.15 1736 - 6.4 0.6
24x24x1 1200 0.17 2000 - 6.4 0.6 1200 0.15 2000 - 7.4 0.7
25x25x1 1302 0.17 2170 - 7.2 0.7 1302 0.15 2170 - 8.3 0.8
A B D
10x10x1 9 1/2" 9 1/2" 3/4"
10x20x1 9 1/2" 19 1/2" 3/4"
12x20x1 11 1/2" 19 1/2" 3/4"
12x24x1 11 3/8" 23 3/8" 3/4"
14x20x1 13 1/2" 19 1/2" 3/4"
14x25x1 13 1/2" 24 1/2" 3/4"
15x20x1 14 1/2" 19 1/2" 3/4"
16x20x1 15 1/2" 19 1/2" 3/4"
16x25x1 15 1/2" 24 1/2" 3/4"
18x24x1 17 3/8" 23 3/8" 3/4"
18x25x1
17 1/2"
24 1/2"
3/4"
Media Area
(Sq. Ft.)
Weight
Each (lbs)
1''
Standard
Capacity
13 ppf
High
Capacity
15 ppf
Nominal
Size (in.)
Actual Size
Nominal
Depth
(in.)
Nominal
Size AxBxD
(in.)
Standard Capacity
High Capacity
300 FPM 500 FPM
Media Area
(Sq. Ft.)
Weight
Each (lbs)
300 FPM 500 FPM
18x25x1
17 1/2"
24 1/2"
3/4"
20x20x1 19 1/2" 19 1/2" 3/4"
20x24x1 19 3/8" 23 3/8" 3/4"
20x25x1 19 1/2" 24 1/2" 3/4"
24x24x1 23 3/8" 23 3/8" 3/4"
25x25x1 24 1/2" 24 1/2" 3/4"
Notes:
1. PD represents pressure drop in inches w.g. The
is 1.0 in. w.g. System design may dictate a lower
change-out point.
2. Efficiency is not affected by the conditioning steps outlined in
ASHRAE 52.2-2007 per Appendix J.
Qty:
Qty:
Model No. Qty:
Specifications:
1. Media is made of 100% synthetic non-woven proprietary media that can
be recycled.
2. The media is supported by an expanded metal continuously laminated on
the air leaving side to provide pleat stability while eliminating flutter.
3. Pleat design is a V-Pleat that aids in pressure drop while reducing
energy cost and allowing total media usage and provides maximum
airflow and dust holding capacity.
4. Frame is a two-piece construction, made of a heavy duty 24 point moisture resistant
material. Diagonal and horizontal support members are bonded to the media on both sides.
5. Highest dust holding capacity and lowest pressure drop in the industry
6. Maintains a mechanical MERV 8 per ASHRAE Standard 52.2. Classified
UL 900 Class 2.
Flanders order No.
Title:
1 Inch Deep Pre Pleat 40 LPD UL
900
Model No.
Customer
Customer order No.
Standard Capacity 80055.01xxxx
High Capacity 80255.01xxxx
Model No.
UL 900 Class 2.
7. Maximum Operating Temperature is 180
°F.
Rev.
B
1" Pre-Pleat 40 LPD 9/8/2011
900
Drawing No. Date

Summary of content (3 pages)