Pre Pleat 40 Data Sheet

CFM PD CFM PD CFM PD CFM PD
12x24x4 600 0.10 1000 0.19 11.1 1.0 600 0.09 1000 0.17 16.5 1.0
16x20x2 667 0.10 1111 0.19 12.3 1.0 667 0.09 1111 0.17 18.0 1.2
16x25x4 833 0.10 1389 0.19 15.5 1.3 833 0.09 1389 0.17 22.6 1.4
18x24x4 900 0.10 1500 0.19 17.3 1.4 900 0.09 1500 0.17 24.2 1.5
20x20x4 833 0.10 1389 0.19 15.4 1.3 833 0.09 1389 0.17 22.3 1.4
20x24x4 1000 0.10 1667 0.19 18.6 1.5 1000 0.09 1667 0.17 24.0 1.7
20x25x4 1042 0.10 1736 0.19 19.3 1.6 1042 0.09 1736 0.17 27.7 1.8
24x24x4 1200 0.10 2000 0.19 22.3 1.8 1200 0.09 2000 0.17 28.8 2.0
25x29x4 1510 0.10 2517 0.19 28.4 2.4 1510 0.09 2517 0.17 28.4 2.7
28x30x4 1750 0.10 2917 0.19 33.2 2.8 1750 0.09 2917 0.17 42.6 3.1
A B D
12x24x4 11 3/8" 23 3/8" 3 3/4"
16x25x4 15 1/2" 24 1/2" 3 3/4"
18x24x4 17 3/8" 23 3/8" 3 3/4"
20x20x4 19 1/2" 19 1/2" 3 3/4"
20x24x4 19 3/8" 23 3/8" 3 3/4"
20x25x4 19 1/2" 24 1/2" 3 3/4"
24x24x4 23 3/8" 23 3/8" 3 3/4"
25x25x4 24 1/2" 24 1/2" 3 3/4"
25x29x4
24 1/2"
28 1/2"
3 3/4"
28x30x4
27 1/2"
29 1/2"
3 3/4"
Media Area
(Sq. Ft.)
Weight
(lbs)
4''
Standard
Capacity
9 ppf
High
Capacity
13 ppf
Nominal
Size (in.)
Actual Size
Nominal
Depth
(in.)
Nominal
Size AxBxD
(in.)
Standard Capacity
High Capacity
300 FPM 500 FPM
Media Area
(Sq. Ft.)
Weight
(lbs)
300 FPM 500 FPM
Notes:
1. PD represents pressure drop in inches w.g. The
recommended final pressure drop for all models
is 1.0 in. w.g. System design may dictate a lower
change-out point.
2. Efficiency is not affected by the conditioning
steps outlined in ASHRAE 52.2-2007 per Appendix J.
Qty:
Qty:
Model No.
Qty:
Specifications:
1. Media is made of 100% synthetic non-woven proprietary media that
can be recycled.
2. The media is supported by an expanded metal continuously laminated
on the air leaving side to provide pleat stability while eliminating flutter.
3. Pleat design is a V-Pleat that aids in pressure drop while reducing
energy cost and allowing total media usage and provides maximum
airflow and dust holding capacity.
4. Frame is a two-piece construction, made of a heavy duty 24 point moisture resistant
material. Diagonal and horizontal support members are bonded to the media on both sides.
5. Highest dust holding capacity and lowest pressure drop in the industry
6. Maintains a mechanical MERV 8 per ASHRAE Standard 52.2.
Classified UL 900 Class 2.
Flanders order No.
Title:
4 Inch Deep Pre Pleat 40 LPD UL
900
Model No.
Customer
Customer order No.
Standard Capacity 80055.04xxxx
High Capacity 80255.04xxxx
Model No.
Classified UL 900 Class 2.
7. Maximum Operating Temperature is 180
°F.
Rev.
B
4" Pre-Pleat 40 LPD 12/23/2011
900
Drawing No. Date