Pre Pleat 62RM11 Brochure

ManualsBrandsFlanders ManualsAir QualityPre Pleat 62RM11 - 10'' x 10'' x 1'' - Standard Capacity Pleated Filters - MERV 11 - Qty 12

Flanders Corporation - Foremost in Air Filtration

Toll Free: 1-800-637-2803 1

General

Pre Pleat™ 62RM11 pleated panel filter enables a

significant upgrade in collection efficiency over existing

MERV 8 products. A 25-30% average efficiency filter

can be upgraded to 60-65% efficiency at roughly the

same resistance levels.

Bi-component media: Our next-generation ultra-

high performance bi-component synthetic media

contains electrostatically engineered tri-lobal fibers

with in homogenous domains of positive and negative

Electret charges within the bi-component fibers to

equal an ultra-high performance product.

Enhanced fibers: Electrostatically enhanced fibers

are precisely structured into a progressive density

gradient structure to enhance airflow through put

with less resistance while providing high dust holding

capacity and ultra-high efficiency during operational

life.

Gradient media structure: Proprietary "Engineered

Gradient Media Structure" enables larger incoming

contaminants to be trapped in the pre-filter layer thus

allowing the highly charged secondary layer to attract

and hold smaller particulate, thereby increasing the

life of more expensive final filters downstream.

High efficiency at low pressure drop: This propri-

etary media combined with Flanders unique V-Pleat

manufacturing design equals the highest performance

pleat available on the market today. The proprietary

Pre Pleat 62RM11 can provide an initial efficiency of

MERV 11 per ASHRAE 52.2-2007.

Physical Data

Media: Progressive density bicomponent fibers

Airflow Resistance on 24" x 24" x 2":

High Capacity: .30” w.g. @ 2000 cfm (500 fpm)

Standard Capacity: .34” w.g. @ 2000 cfm (500 fpm)

Media Support: Diamond-shaped expanded metal

Pleat Design: V Pleat

Frame: Moisture-resistant clay coated frame

Pre Pleat

62RM11

MERV 11 Pleated Filters

Bulletin PB7022-0611

Important Features

• Upgrade existing rooftop and secular systems

by up to 300% in efficiency to remove incom-

ing contaminants not previously removed.

• Upgrade existing prefilter plenums with the

62RM11 Pleat to increase the life of your

more expensive final filters downstream.

• Building owners and occupants will be sig-

nificantly better protected from a bioaerosol

hazard than with conventional filters.

• Available by special ordering in High-Velocity

design. Contact Factory for pricing

FOREMOST IN AIR FILTRATION

Summary of content (4 pages)

PAGE 1
Pre Pleat® 62RM11 MERV 11 Pleated Filters F O R E M O S T I N A I R F I LT R AT I O N Bulletin PB7022-0611 General Pre Pleat™ 62RM11 pleated panel filter enables a significant upgrade in collection efficiency over existing MERV 8 products. A 25-30% average efficiency filter can be upgraded to 60-65% efficiency at roughly the same resistance levels.
PAGE 2
Performance Data Capacities and Dimensions Nominal Depth (in.) 1 2 Nominal Size WxHxD (in.) 300 fpm 500 fpm cfm PD cfm PD Media Wt. Area Each sq. ft. (lbs.) 300 fpm cfm PD 500 fpm cfm PD Media Wt. Area Each sq. ft. (lbs.) 10 10 12 12 14 14 15 16 16 18 18 20 20 20 24 25 x x x x x x x x x x x x x x x x 10 20 20 24 20 25 20 20 25 24 25 20 24 25 24 25 x x x x x x x x x x x x x x x x 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 208 417 500 600 583 729 625 667 834 900 938 834 1000 1042 1200 1303 0.16 0.
PAGE 3
Pre Pleat 62RM11 MERV 11 by ASHRAE 52.2 Filter pack sealed in frame at every point of contact.
PAGE 4
Guide Specifications 1.0 General 1.1 2.2 Air filters shall be Model Pre Pleat 62RM11 panel filters, as manufactured by Flanders. 2.0 Filter Construction 2.1 Each filter shall consist of an electrostatically charged synthetic only media, with corrosionresistant expanded metal backing and moisture resistant enclosing frame. The filter shall be 1”, 2” or 4” nominal depth.The grid shall be 100% bonded to the media on the air exiting side to eliminate media vibration and pullaway.