User Manual

14
5、Install wire spool.
0.030”(0.8mm)/0.040”(1.0mm)diameter,
4”(100mm 1kg)wire spool.
5
、
Set drive roll.
Face the side marked 0.030” away from the machine.
Remarks: 1. There are two grooves on one wire feed wheel, one side is 0.030” (0.8mm) and the other side is
0.040” (1.0mm) to match the corresponding wire diameter.
2. Gear wire feed wheel, gear wire feed wheel is suitable for flux-cored welding wire, our standard
configuration has 1 piece of 1kg flux-cored welding wire, which can be directly installed and used.
6、Feed wire and set pressure.