User's Manual

PAD-1000
Wireless Broadband Modem User Guide Page 6
3. The CD Launcher Menu should appear. If the Menu does not
appear, see box below.
4. In the CD launcher menu, click “Install Software”
5. Select the option for your operating system to launch the Mobility
Manager wizard. If the Mobility Manager wizard dialog box does not
appear (it may be hidden behind the CD launcher menu), press the
Esc key; it should now be visible. The Mobility Manager wizard guides
you through the installation of the Mobility Manager and the Modem
driver (for USB connections only).
6. Follow the on-screen directions. Click “Next” after each step. Note: at
the software license agreement step, click Next if you wish to accept
the agreement and Cancel if you wish to reject it. Rejecting the
agreement will terminate the installation.
7. Click “Finish” to end the installation. Note: if the CD launcher menu is
still visible, click “Main Menu” and then “Exit Browser.”
8. Remove the CD-ROM
ü STEP 1 COMPLETE- YOUR SOFTWARE IS NOW INSTALLED.
If the CD does not start automaticall
y:
1) Click “Start” then “Run”.
2) In “Open,” type the letter of your CD-ROM drive followed by install.exe
(example - D:\install.exe, where D is the CD-ROM drive), or click
"Browse" to locate and select the install.exe file on your CD-ROM drive.
3) Click “OK” to start the Mobility Manager wizard, which will guide you
through the installation.
Figure 1, Mobility Manager Software