User's Manual

Connecting the Power S ystem
Chapter 4. Connecting the Power System
The outdoor base station cabinet requires a connection to AC power. This chapter c ontains
procedures f o r routing the power cable and connecting to power and ground.
WARNING:
WHEN PERFORM ING ANY TASKS INVOLVING THE P OWER
SYSTEMS, MAKE SURE THAT THE POWER IS NOT LIVE. ALL POWER
OPERATIONS SHOULD BE PERFORMED BY QUALIFIED PERSONNEL
ONLY.
4.1. Routing the Power Cable
The main power cable is routed into the ca binet from the left rear of the c abinet, through a flexible
conduit up to the AC Load Center. See Figure 4-1: Power Cable E ntry — R ear View and Figure
4-2: Conduit for Power Cable — Rear View. Internal cabinet wiring routes the power from the
load center to the equipme nt in the base station.
For this procedur e you will need:
• Handle hex tool key — Sierra Pac ific pa rt num be r 392–K or equivalent
• Conduit pull box with hole dia me ter 1.375” to 1.50”
Figure 4-1: Power Cable Entry — Rear View
© 2005 Flarion
Flarion Proprietary and Confidential
Version 1.3
Page 4-1