User's Manual

Connecting the Power Cable
4.2. Connecting the Power C ab le
1.
Locate the AC powe r connection points in the Load C enter. See Figure 4-3: Load C enter
Connections.
Figure 4-3: Lo ad Center Connections
2.
Insert the ground wire into the ground connector and tighten the screw. Use #12 AW G
wire or heavie r.
3.
Connect the power c able to the screw terminals f or Neutral, Line 1, a nd Line 2. Use #12
AWG wire or heavier.
4.
Connect the other end of the cable to the AC power source in the Service Entra n ce.
© 2005 Flarion
Flarion Proprietary and Confidential
Version 1.3
Page 4-3