POP Assembly Diagram {Frustration # 2 3. Attach; = ym i F Casters (B) to the Five Star Base (P3) as shown in Illustration # 2. . Remove Plastic Cap from end of Cylinder Rod and Insert Cylinder (C) in the Top Support (P-2) as shown in , lust ration #3. Cylinders Rod Plastic Cap 5. Attach Five Star Base (P-3) on the Cylinder (C). Place the unit in Upright position. Do not use tinsels all screws are tight. At least every six months, _ check all screws robe sure they are tight.