MINI DRONE EN User Manual DE Benutzerhandbuch ES Manual de uso FR Manuel de l’utilisateur IT Manuale d’Uso DK Brugervejledning FI Käyttöohjeet NL Gebruiksaanwijzing NO Brukermanual PL Instrukcja obsługi PT Manual de Utilização SE Användarmanual CN 用戶手冊 JP ユーザーマニュアル
. Cha EN User Manual OVERVIEW Short press to change speed. Long press for reverse function. Short press for 360° flip. Long press for headless mode. Pow Left Control Stick Right Control Stick Easy take-off and landing button. Press and hold for 3 seconds to make an emergency stop. ON/OFF US Tips 1. For 2. Flig HEAD Sensing Point 3. To a 4. The 5. Rec Rotor Blade FLIG Sensing Point Sensing Point Motor Battery ON/OFF TAIL Sensing Point FLIGHT PREPARATION 1. Install the remote batteries.
2. Charge the battery of the Drone. 3. Install the Drone battery after it’s fully charged. USA Adapter Power Bank QL 752030 3.7V 300mAh 20201117 USB Port Charging: Red LED Fully Charged: LED off Connect the battery into the interface and slide it to the end. Tips: 1. For your safety, please use the original battery and USB cable. 2. Flight time of the battery may be reduced when flying in cold weather. 3. To avoid risks of explosion, ensure the battery isn’t exposed to any sharp objects. 4.
Remote Instructions Left Control Stick Ascend and Descend Push the Left Control Stick forward and the Drone will ascend. Pull the Left Control Stick backward and the Drone will descend. Rotate Left and Rotate Right Push the Left Control Stick left and the Drone will rotate to the left. Pull the Left Control Stick right and the Drone will rotate to the right. Right Control Stick Forward and Backward Push the Right Control Stick forward and the Drone will fly forward.
Take off Option 1: Press the button to take off. Option 2: Move the Left Control Stick to lower left position at 45° angle and the Right Control Stick to lower right position at 45° angle at the same time until the four rotor blades start rotating, then slowly push the Left Control Stick forward to take off. Landing Option 1: Press the button to land.
Flight Trimming With H the dro 1. To e If the Drone drifts forwards or backwards when flying, press the Right Control Stick down and then forwards or backwards to adjust as necessary. 2. Lon In th or th mode. If the Drone drifts left or right when flying, press the Right Control Stick down and then left or right to adjust as necessary. on at ward east g. Hea Altitude Hold / Hover The Drone will hover at the current flight height when you release the Left Control Stick after ascending or descending.
Headless Mode With Headless Mode, the Drone remembers the orientation of the drone when you take off. When you press left on your controls the drone will go left. Likewise for right, regardless of which way the drone is facing. 1. To ensure headless mode works well, please ensure correct take off position as the below picture shows. 2. Long press the right upper button to active headless mode. You will hear 2 beeps that indicates headless mode is activated.
Sensing Function If the Drone is flying at a height that you can reach with your hand, you can also control the drone via the sensing function. 1. DO 2. DO Front Back Left 3. DO 4. DO hurr 5. Stay 6. This 7. Be s resp Right 1. Tho 2. Do n 3. Rem 4. Do n Obstacle avoidance The Drone features 4 sensing points. During flight, these sensing points will sense an obstacle to help avoid unwanted crashes. 5. Stor 6. Do n obje 7. Plea 8. Do n 9. Do n flam 10.
shes. will DISCLAIMER AND SAFETY GUIDELINES 1. DO NOT look directly into the drone light. 2. DO NOT treat the product as household waste. 3. DO NOT fly above or near obstacles, crowds, open water, public road, high voltage power lines or trees. 4. DO NOT use the drone in severe weather conditions. These include wind, snow, rain, smog, hail, lightning, tornadoes or hurricanes. 5. Stay away from the rotating propellers and motors to avoid some tiny objects (e.g. hair) to get into them. 6.
ISED Compliance Statements This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s). Operation is subject to the following two conditions: (1)This device may not cause interference. (2)This device must accept any interference, including interference that may cause undesired operation of the device.
