User's Manual

The Drone will hover at the current flight height when you release the Left Control Stick after ascending or descending.
The Drone can perform a 360 ° flip once it reaches a height of 2 meters or more.
Press 360 ° flip button to initiate and then move the Right Control Stick forwards, backwards, left or right to flip the Drone
accordingly.
1. To ensure headless mode works well, please ensure correct take off position as the below picture shows.
2. Long press the right upper button to active headless mode. You will hear 2 beeps that indicates headless mode is activated.
In this mode, the Drone will fly following the direction of the Right Control Stick regardless of the position of your drone’s head
or the tail. The LED on the Drone will flash during headless mode. Long press the same button again to cancel headless
mode.
With Headless Mode, the Drone remembers the orientation of the drone when you take off. When you press left on your controls
the drone will go left. Likewise for right, regardless of which way the drone is facing.
One key reverse allows you to quickly reverse the Drone with one press of a button.
1. While the Drone is in flight, long press the reverse button on the remote control, the controller will beep once and the Drone
will fly in reverse.
2. Push the right control stick to any direction for cancelling this function.
The Drone is set to low speed by default. You can increase the speed to medium pace by pressing the upper-left button. Two
beeps will sound from the remote to indicate a successful speed change. Press the same button again to revert to low speed. A
single beep will sound from the remote to indicate a successful speed change.
Headless Mode
One Key Reverse
Speed Switch
Standard Mode Headless Mode
Forward
Forward
Backward
Operator
The correct take off
position.
The incorrect take off
position.
Backward