User Guide

Finder User Guide | www.flashforge.com 400-699-1063
19
Extruder Calibration
Adjust Z-axis to the right position and tap
[OK]
 +: The build plate elevates.
 -: The build plate descends.
OK: To save the setting and back to setting
menus.
 Back
The proper d istance may be one ordinary
paper’s thickness.
Note: Please do this operation after
contacting with our after-sale engineer.
Turn on/off [FlashForge Cloud]:

Tap to turn on/off the FlashForge Cloud
Connection.
Turn on/off [Startup Sound]:
Tap to turn on/off the sound when restart
the printer.
Power Saving Mode On
The power saving mode status is turned on.
If there is no operation within half an hour,
the printer will automatically shut down.
(Power saving mode will not work in the
process of printing)
Power Saving Mode Off
The power saving mode status is turned off.
Automatically shut down will not work.