User Guide

Finder User Guide | www.flashforge.com 400-699-1063
28
(4-2) Take out the filament and thread it through the filament detecting equipment.
(Note: The filament should feeds from the bottom of the spool towards the top)
After installing t he filament, put the cartridge back to the printer.
4.2 Printer Start-up
(4-3) Insert the power supply into the power input on the back of the Finder and plug
the power cable into an electrical outlet. Then turn on the power switch.
(4-4) Press the touch screen button to start the device.
4.3 Loading Filament
For stable filament loading and proper device protection, you need to install the
filament guide tube properly.
(4-5) Take out the filament guide tube, thread the filament from the filament
cartridge through the tube.
4‐4