User Guide

Finder User Guide | www.flashforge.com 400-699-1063
60
done.
Print When Slice Done: If you print via USB cable, you can check the box, while if
you print via USB stick, you should not check the box.
Machine Type: FlashForge Finder
Supports: If you print a model with supports, you should click the inverted triangle
and select [Enable].
Raft: You are suggested to select [Enable].
Resolution: You are suggested to select [Standard]
More Options: You are suggested to keep them default.
Click [OK] to select the path to save the Gcode file. You can rename the file as you
like and save it as a .g or .gx file, click [Save] to generate a Gcode file.
Note: .gx files are available for preview while the .g files are not. They are displa ying
as follows:
g. Files gx. Files
7-7
Next, we are going to print the model.