User Guide

Finder User Guide | www.flashforge.com 400-699-1063
62
If you want to print a Gcode from a local folder, you just need to load the file into
FlashPrint at the status of USB connection or WiFi connection, then click the [Print]
button on the top-right.
● Load the target Gcode file into FlashPrint.
7-9
● Click the [Print] button, the PC will transfer the Gcode file to the printer.
7‐10
● After finishing trans ferring, the printer will heat up automatically. And when heating
finishes, the print will start to build the model.