User Guide

Finder User Guide | www.flashforge.com 400-699-1063

7.2.3 Print from USB Stick

①Insert your USB stick with target .g or .gx file to your Finder. .

②

Turn on the Finder. Make sure the build plate has been leveled and the filament is

loaded.

③Tap [Print] andthentaptheUSB Stick Card icon in the middle. The file(s) will be

displayed on the screen. Select the file you want to print and tap [Print]. The file will

be transferred to the printer.

⑥And the printer will heat up the nozzle automatically and start to print after the

nozzle reaches the aimed temperature.,

Abort：To stop heating and printing. Once you tap [Abort], the process is irreversible.

Pause

：

To suspend the print job, you can tap it again to resume it. You can use this

function when you want to change the filament halfway.

7-11