User Manual
Table Of Contents
- Contents
- Acknowledgment
- Commitment
- PRECAUTIONS
- Chapter 1: What’s in the Box?
- Chapter 2: Unpacking
- Chapter 3: Hardware Assembly
- Chapter 4:Software Installation
- EXPLANATION OF GCODE SETTINGS
- Chapter 5: USB Connection & Temperature Setting
- Chapter 6: Filament
- Chapter 7: First Print
- Note：The printer won’t turn on the turbofan automa
- Chapter 8: Dual Extruder Print
- Chapter 9: Other Information
12
Chapter 4:Software Installation
Steps for installing your software:
Method 1: (1)Download the appropriate version of ReplicatorG suitable for your system
from: www.ff3dp.com
Steps
：
Support--Downloads--Creator Pro FDM 3D Printer--Software(ReplicatorG&Python)
(2) After completing loading, please decompress the RAR. files.
(3) First, run Python-2.7.8.amd64 and the Python 2.7.8 and the double click the Replicator
G icon to start the software.
Method 2: From the SD card shipped with your printer, browse to the “ operational
software ” folder and run Python-2.7.8.amd64 and the Python 2.7.8.
After completing the Python component installation, click Replicator-0040r24-Sailfish-
windows to install the ReplicatorG software.
To run the ReplicatorG software, double click the shortcut on your desktop or in your start
menu.
SPECIAL NOTES TO WIN 8 and WIN 10 USERS BEFORE SOFTWARE INSTALLATION
Win 8 and Win 10 users please make sure that you have disabled the Driver Signature Enforcement setting before
installing the ReplicatorG software. Below is a video link showing you how to accomplish this:
http://www.youtube.com/watch?v=NM1MN8QZhnk