User Manual
Table Of Contents
- Contents
- Acknowledgment
- Commitment
- PRECAUTIONS
- Chapter 1: What’s in the Box?
- Chapter 2: Unpacking
- Chapter 3: Hardware Assembly
- Chapter 4:Software Installation
- EXPLANATION OF GCODE SETTINGS
- Chapter 5: USB Connection & Temperature Setting
- Chapter 6: Filament
- Chapter 7: First Print
- Note：The printer won’t turn on the turbofan automa
- Chapter 8: Dual Extruder Print
- Chapter 9: Other Information
30
nozzles.
· The distance between the extruder nozzles and the build plate should be about the thickness of
the leveling card.
Note: To view a video of the build plate leveling process, please go to the FF Creator pro video
page on: https://www.youtube.com/playlist?list=PLWfXP01hqgWsEfzZ5Z-sZzifa05iIZb0Q
Now, let’s start the first print. Click File > Examples and then select the
20mm_Calibration_Box.stl. The preview interface will then appear along with a virtual
impression of the 20mm cube on the virtual printer bed. On the preview interface click Move >
Center and Put on platform so that the sample will be printed on the center of the build plate