User Manual
Table Of Contents
- Contents
- Acknowledgment
- Commitment
- PRECAUTIONS
- Chapter 1: What’s in the Box?
- Chapter 2: Unpacking
- Chapter 3: Hardware Assembly
- Chapter 4:Software Installation
- EXPLANATION OF GCODE SETTINGS
- Chapter 5: USB Connection & Temperature Setting
- Chapter 6: Filament
- Chapter 7: First Print
- Note：The printer won’t turn on the turbofan automa
- Chapter 8: Dual Extruder Print
- Chapter 9: Other Information
35
NOTE: Do not check "the 'use raft/support' option. If you want to print dual colors with PLA
filament, then perform the following settings:
If you want to print dual colors with ABS filament, select Replicator slicing defaults under the
Slicing Profile column, and lower the Feedrate to 60 and Travel Feedrate to 80.
Click the Generate Gcode option for both boxes. After the Gcode is generated, click on the gcode
tab as highlighted below and change HBP temperature to 50 if you are printing with PLA and save
this modification by going to File > Save.