User Guide

Creator Pro User Guide | www.FlashForge.com 400-699-1063
35
filament of another extruder.
⑦ Brim
⑧Resolution：You have three resolution solution(with default setting)to choose
from, high resolution is corresponding with slow printing speed, opposite for the low
resolution.For PLA printing, an extra solution “Hyper” is available.
⑨
More options: Click [More options] to set for layer, shell, infill, speed and
temperature. Different resolution solution is corresponding to different defaults, click
[Restore Defaults] to back to default setting.
●Layer Height
a. Layer Height: Layer thickness of the printing model. With a small value, the
surface of the model will be smoother.
b. First Layer Height: This is the first layer of the model, which will affect the
sticking performance between the model and platform. Maximum is 0.4mm, and
usually the default is OK.
c. Shells: Contains the outside shell value, capping layer value (under vase mode,
top solid layer setting is invalid.)
● Perimeter Shells: Maximum is 10
a. Top Solid Layers: Maximum is 30, minimum is 1.
b. Bottom Solid Layers: Maximum is 30, minimum is 1.
● Infill
a. Fill Density means fill rate.
b. Fill Pattern is the pattern of filling shape which effects printing duration.
c. Combine Infill: You can select the layers for combining according to the layer
thickness. The combined thickness should not exceed 0.4mm. “Every N layers” is for
all the infills while “Every N inner layers” is only for inner infills, which generally
can save print time.
6-14