User Guide
Table Of Contents
- Contents
- Preface
- 1.1.1 Make a 3D Model
- 1.1.2 Slice and Export the 3D Model
- Chapter 2: About Creator Pro
- 2.1 About Your Creator Pro
- 2.1.1 Views
- Chapter 3: Unpacking
- Chapter 4: Hardware Assembly
- Chapter 5: Build Plate Leveling
- Chapter 6: About Software
- This chapter talks about the basic function of Fla
- 6.1 Software Installation
- 6.2 Exploring FlashPrint
- ①Changing views
- ②Set View
- ③Reset View
- ④Show Model Outline
- ⑤Show Steep Overhang
- 6.2.5 Move
- 6.2.6 Rotate
- 6.2.7 Scale
- 6.2.8 Cut
- 6.2.9 Extruder
- 6.2.10 Supports
- ②Auto Supports
- ③Add Supports
- ④ Clear Supports
- Click [Clear Supports], all supports will be delet
- ⑤Delete Supports
- 6.2.11 Print
- ①New Project
- ②Saving
- ③ Preferences
- 6.2.13 Edit Menus
- 6.2.14 Tools
- 6.2.15 Help Menus
- 7.1 Generate a Gcode
- 7.1.1 Installing Filament
- 7.2 Loading the Filament Using the LCD Panel
- 7.3 Unloading the Filament Using LCD Panel
Creator Pro User Guide | www.FlashForge.com 400-699-1063
44
extruder temperature reaches 200°C or higher. Once the machine reaches this point,
you will feel the filament being pulled into the extruder head.
7.1.1 Installing Filament
(7-7) First, remove the filament guide tube from the extruder.
7-7
(7-8) To avoid filament jams, always ensure that any filament spool you mount on the
Creator Pro feeds from the bottom of the spool toward the top. Filament mounted on
the right spool holder [When viewed from the back] should always unspool clockwise
and filament loaded onto the left holder should always unspool counterclockwise.
Moreover, when you insert the filament into the filament intake, you should press
down the spring presser first.
7-8
Note: The left extruder is suggested to print with PLA while the right extruder is
suggested to print with ABS. Because the left extruder locates beside the turbofan
baffle, which is more beneficial for cooling down the PLA models.